SCOTTSBLUFF, NE —
OSHA Inspection: FLOYD TRUCK CENTER INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of FLOYD TRUCK CENTER INC. in 322 S. BELT LINE HWY E., SCOTTSBLUFF, NE 69363 (NAICS 811118). OSHA activity number 342877644.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FLOYD TRUCK CENTER INC.
- Site address
- 322 S. BELT LINE HWY E.
- City
- SCOTTSBLUFF
- State
- NE
- ZIP
- 69363
- Mailing
- 322 S. BELT LINE HWY E., SCOTTSBLUFF, NE 69363
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811118
- Employees
- 40
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.107 B05 I
- Issued
- Apr 10, 2018
- Abate by
- Oct 15, 2018
- Penalty
- Initial $6,652 · Current $5,410 Reduced
General-duty citation text
29 CFR 1910.107(b)(5)(i): There were no visible gauges, audible alarms or pressure activated devices installed in paint spray booths to indicate or ensure that the required air speed was maintained. The employer is failing to protect employees from fire hazards. This was most recently documented on January 10, 2018 at 322 S. Belt Line Hwy E. Scottsbluff Nebraska. The employer had a magnehelic gauge installed within the booth to measure the air flow across the outgoing filter bank. The gauges face was covered with overspray rendering the gauge unreadable.
Recent events (2)
- — I (O) $5410
- — Z (S) $6652
1910.107 B05 IV
- Issued
- Apr 10, 2018
- Abate by
- Oct 15, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(b)(5)(iv): Space within the spray booth on the downstream and upstream sides of filters were not protected with approved automatic sprinklers: The employer is failing to protect employees from fire hazards. This was most recently documented on January 10, 2018 at 322 S. Belt Line Hwy E. Scottsbluff Nebraska. The paint booth used to apply paint to semi-trucks was not equipped with a fire suppression system.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.212 A01
- Issued
- Apr 10, 2018
- Abate by
- May 4, 2018
- Penalty
- Initial $8,315 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by: The employer is failing to protect employees from a amputation hazard. This was most recently documented on January 10, 2018 at 322 S. Belt Line Hwy E. Scottsbluff Nebraska. All portions of the blade of the horizontal band saw was not guarded. The Wells band saw is used for cutting metal piping.
Recent events (2)
- — I (S) $0
- — Z (S) $8315
1910.304 G05
- Issued
- Apr 10, 2018
- Abate by
- May 4, 2018
- Penalty
- Initial $6,652 · Current $5,410 Reduced
General-duty citation text
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: The employer is failing to protect employees from an electric shock hazard. This was most recently documented on January 10, 2018 at 322 S. Belt Line Hwy E. Scottsbluff Nebraska. The employer failed to ensure that the bench grinder located in the service department was equipped with a ground prong at the end of the electrical plug.
Recent events (2)
- — I (O) $5410
- — Z (S) $6652
1910.176 B
- Issued
- Apr 10, 2018
- Abate by
- May 4, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.176(b): Storage of material created a hazard: The employer is failing to protect employees from struck-by hazards. This was most recently documented on January 10, 2018 at 322 S. Belt Line Hwy. E Scottsbluff Nebraska. The employer failed to secure storage racking in the warehouse when fork lift traffic was present.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 A04
- Issued
- Apr 10, 2018
- Abate by
- May 4, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: The employer is failing to protect employees from struck-by hazards. This was most recently documented on January 10, 2018 at 322 S. Belt Line Hwy E. Scottsbluff Nebraska. The employer failed to get written approval prior to installing a speed handle on the green NMC fork lift.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 811118)
More inspections in NE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342877644.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.