Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: STACKBIN CORPORATION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of STACKBIN CORPORATION in 29 POWDER HILL ROAD, LINCOLN, RI 02865 (NAICS 337127). OSHA activity number 342887148.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Stackbin Corporation — free Get an email when a new federal OSHA severe-injury report for Stackbin Corporation is published. One employer, no account, unsubscribe in one click.
Site address
29 POWDER HILL ROAD
City
LINCOLN
State
RI
ZIP
02865
Mailing
29 POWDER HILL ROAD, LINCOLN, RI 02865
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
337127
Employees
17
Ownership type
A

8 citations on file for this inspection.

1910.134 E01

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 30, 2018
Abate by
Feb 15, 2018
Penalty
Initial $3,696 · Current $3,696
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  (a) Worksite:  On or about 1/19/2018, employees were not medically evaluated and qualified to wear a respirator before required to wear one.
Recent events (2)
  • — I (S) $3696
  • — Z (S) $3696

1910.134 F02

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 30, 2018
Abate by
Feb 15, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.134(f)(2): Employees using a tight-fitting face-piece respirator were not annually fit tested:   (a) Worksite:  On or about 1/19/2018, employees had not received an annual fit test to ensure that their tight-fitting face-piece respirator fit properly.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 C04 II

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 30, 2018
Abate by
Mar 16, 2018
Penalty
Initial $3,696 · Current $3,696
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to Items of this section:  (a) Worksite:  On or about 1/19/2018, the employer had not developed Lockout/Tag-out procedures specific to the various types of machines and energy sources.
Recent events (2)
  • — I (S) $3696
  • — Z (S) $3696

1910.147 C07 I A

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 30, 2018
Abate by
Mar 16, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(7)(i)(A): Authorized employees did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation:  (a) Worksite:  On or about 1/19/2018, the employer had not provided training to employees authorized to perform Lockout/Tag-out.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 C07 I B

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 30, 2018
Abate by
Mar 16, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure:   (a) Worksite:  On or about 1/19/2018, the employer had not provided training to machine operators and other employees affected by the use of Lockout/Tag-out.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 L06

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 30, 2018
Abate by
Mar 16, 2018
Penalty
Initial $3,696 · Current $1,478 Reduced
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):     (a) Worksite:  On or about 1/19/2018, the employer did not certify each powered industrial truck operator for being trained and evaluated to operate forklifts.
Recent events (2)
  • — I (S) $1478
  • — Z (S) $3696

1910.212 A03 II

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 30, 2018
Abate by
Mar 16, 2018
Penalty
Initial $3,696 · Current $0 Reduced
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employees from having any part of their body in the danger zone during operating cycles:    (a) Worksite:  On or about 1/19/2018, the employer did not ensure that employees were protected from point of operation hazards while operating Press Brake B6.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3696

1910.1200 E01

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 30, 2018
Abate by
Mar 16, 2018
Penalty
Initial $2,956 · Current $0 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:     (a) Worksite:  On or about 1/19/2018, the employer had not developed and communicated a hazard communication program to employees, so they could better understand the hazards associated with chemicals they work with, and how best to protect themselves from potential hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2956

View Stackbin Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342887148.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.