SAN ANTONIO, TX —
OSHA Inspection: PHENIX ARCHITECTURAL WOODWORK
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of PHENIX ARCHITECTURAL WOODWORK in 5107 MONACO CIRCLE STE. 1, SAN ANTONIO, TX 78263 (NAICS 321918). OSHA activity number 342898459.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PHENIX ARCHITECTURAL WOODWORK
- Site address
- 5107 MONACO CIRCLE STE. 1
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78263
- Mailing
- 5107 MONACO CIRCLE STE. 1, SAN ANTONIO, TX 78263
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 35
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A03 II
- Issued
- Apr 6, 2018
- Abate by
- Apr 23, 2018
- Penalty
- Initial $3,880 · Current $3,880
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, was not guarded, and was not designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle; Near east wall of shop: On or about January 24, 2018, and at times prior thereto, employees were exposed to an amputation hazard, while using a Ridgid Drill Press (Model No. DP15000, Serial No. 00171E0082) to drill holes in wood pieces.
Recent events (1)
- — Z (S) $3880
1910.212 B
- Issued
- Apr 6, 2018
- Abate by
- Apr 23, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(b): Machines designed for a fixed location were not securely anchored to prevent walking or moving: Near the east wall of the shop: On or about January 24, 2018, and at times prior thereto, employees were exposed to a struck-by hazard, while using a Ridgid Drill Press without it being anchored to the floor.
Recent events (1)
- — Z (S) $0
1910.242 B
- Issued
- Apr 6, 2018
- Abate by
- Apr 23, 2018
- Penalty
- Initial $7,760 · Current $7,760
General-duty citation text
29 CFR 1910.242(b): Compressed air was used for cleaning purposes and was not reduced to less than 30 p.s.i. and then only with effective chip guarding and personal protective equipment: Throughout the shop: On or about January 24, 2018, and at times prior thereto, employees were exposed to struck by flying projectile hazards, while using compressed air blow guns without safety relief devices at pressures above 30 p.s.i. for cleaning purposes.
Recent events (1)
- — Z (S) $7760
1910.38 B
- Issued
- Apr 6, 2018
- Abate by
- Apr 23, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.38(b): An emergency action plan was not in writing, kept in the workplace, and available to employees for review: On or about January 24, 2018, an emergency action plan was not in place or kept in writing exposing employees to delayed egress in the event of an emergency.
Recent events (1)
- — Z (O) $0
More inspections at Phenix Architectural Woodwork
View Phenix Architectural Woodwork's full OSHA safety record →
More inspections in this industry (NAICS 321918)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342898459.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.