GREENVILLE, OH —
OSHA Inspection: RUMPKE CONSOLIDATED COMPANIES, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of RUMPKE CONSOLIDATED COMPANIES, INC. in 5474 JAYSVILLE-ST. JOHNS ROAD, GREENVILLE, OH 45331 (NAICS 562111). OSHA activity number 342902673.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RUMPKE CONSOLIDATED COMPANIES, INC.
- Site address
- 5474 JAYSVILLE-ST. JOHNS ROAD
- City
- GREENVILLE
- State
- OH
- ZIP
- 45331
- Mailing
- 1097 ST. RT. 22W, CIRCLEVILLE, OH 43113
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 562111
- Employees
- 82
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.22 D01
- Issued
- Mar 6, 2018
- Abate by
- Mar 23, 2018
- Penalty
- Initial $8,481 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(d)(1): (1) Walking-working surfaces are inspected, regularly and as necessary, and maintained in a safe condition; The employer had not regularly inspected the concrete floor of the Transfer Station building when on January 19, 2018, the floor being wet, covered in sludge, dirt and trash filled, a forklift operator was operating in the building with rear smooth tires and while attempting to make a right turn the truck skidded into the loading pit.
Recent events (2)
- — I (S) $0
- — Z (S) $8481
1910.28 B01 I
- Issued
- Mar 6, 2018
- Abate by
- Apr 6, 2018
- Penalty
- Initial $7,068 · Current $2,800 Reduced
General-duty citation text
29 CFR 1910.28(b)(1)(i): (1) Unprotected sides and edges. (i) Except as provided elsewhere in this section, the employer must ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following: Employees working inside the Transfer Station Building near the edge of the loading pit were exposed up to a 8 ft. fall hazard without the use of any fall protection system.
Recent events (2)
- — I (S) $2800
- — Z (S) $7068
1910.30 A01
- Issued
- Mar 6, 2018
- Abate by
- Mar 23, 2018
- Penalty
- Initial $8,481 · Current $0 Reduced
General-duty citation text
29 CFR 1910.30(a)(1): (a) Fall hazards. (1) Before any employee is exposed to a fall hazard, the employer must provide training for each employee who uses personal fall protection systems or who is required to be trained as specified elsewhere in this subpart. Employers must ensure employees are trained in the requirements of this paragraph on or before May 17, 2017. The employer did not ensured that employees working in the Transfer Station building were trained on the fall hazard while working near the edge of the loading pit.
Recent events (2)
- — I (S) $0
- — Z (S) $8481
1910.178 N10
- Issued
- Mar 6, 2018
- Abate by
- Mar 23, 2018
- Penalty
- Initial $8,481 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.178(n)(10): The driver shall be required to slow down for wet and slippery floors. On January 19, 2018, inside the Transfer Station Building, a Hyster sit-down forklift operator was travelling on the wet, sludge, and trash laden concrete floor inside the transfer station and was attempting to make a right turn to the dock area to unload a tractor trailer of pallets when the forklift skidded in a straight line into the trailer pit.
Recent events (2)
- — I (O) $1000
- — Z (S) $8481
1910.178 Q07
- Issued
- Mar 6, 2018
- Abate by
- Mar 16, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks shall be examined before being placed in service, and shall not be placed in service if the examination shows any condition adversely affecting the safety of the vehicle. Such examination shall be made at least daily. Where industrial trucks are used on a round-the-clock basis, they shall be examined after each shift. Defects when found shall be immediately reported and corrected. The Hyster sit-down forklift was not examined on January 19, 2018 before being placed in service that morning before being operated by an operator around 10:30 am.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 562111)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342902673.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.