GLENVIEW, IL —
OSHA Inspection: A J CARPENTRY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of A J CARPENTRY, INC. in 1030 WOODLAWN, GLENVIEW, IL 60025 (NAICS 238130). OSHA activity number 342916160.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- A J CARPENTRY, INC.
- Site address
- 1030 WOODLAWN
- City
- GLENVIEW
- State
- IL
- ZIP
- 60025
- Mailing
- 200 E. WALNUT AVE., DES PLAINES, IL 60016
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 4
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.178 L01 I
- Issued
- Feb 6, 2018
- Abate by
- Mar 5, 2018
- Penalty
- Initial $3,658 · Current $2,180 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): 29 CFR 1926.602(d): Note: The requirements applicable to construction work under paragraph (d) of this section are identical to those set forth at paragraph (l) of 29 CFR 1910.178. a) On or about January 31, 2018, the employer engaged in the operation of an all-terrain forklift without ensuring competency to operate the equipment safely, as demonstrated by successful completion of forklift training and evaluation. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $2180
- — Z (S) $3658
1926.102 A01
- Issued
- Feb 6, 2018
- Abate by
- Feb 12, 2018
- Penalty
- Initial $4,878 · Current $3,025 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection when machines or operations present potential eye or face injury from physical, chemical, or radiation agents: a) On or about January 31, 2018, employees were exposed to eye injury while operating nail guns without the benefit of eye protection. A J Carpentry, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.102 (a)(1) which was contained in OSHA inspection number 974924, citation 1, item 1, and was affirmed as a final order on May 15, 2014, with respect to a worksite located at 1333 Warrington, Deerfield, Illinois. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (R) $3025
- — Z (R) $4878
1926.501 B13
- Issued
- Feb 6, 2018
- Abate by
- Feb 12, 2018
- Penalty
- Initial $8,536 · Current $5,295 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b): a) On or about January 31, 2018, employees were exposed to the hazard of falling approximately 20 feet to the exterior of the building while working from the top plate and deck of the second story without the benefit of fall protection. b) On or about January 31, 2018, employees were exposed to the hazard of falling approximately 9 feet from a second story to a lower deck while working without the benefit of fall protection. A J Carpentry, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501 (b)(13) which was contained in OSHA inspection number 974924, citation 1, item 2, and was affirmed as a final order on May 15, 2014, with respect to a worksite located at 1333 Warrington, Deerfield, Illinois. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (R) $5295
- — Z (R) $8536
1926.503 B01
- Issued
- Feb 6, 2018
- Abate by
- Mar 5, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(b)(1): The employer did not verify fall protection training by preparing a written certification record: a) On or about January 31, 2018, the employer did not prepare written certification records related to employee fall protection training. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at A J Carpentry, INC.
View A J Carpentry, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342916160.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.