Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: THERMAL CONTROL AND FABRICATION, INC.

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of THERMAL CONTROL AND FABRICATION, INC. in 354 HOLLINGER RD, CALVERT CITY, KY 42029 (NAICS 336611). OSHA activity number 342923505.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Thermal Control and Fabrication, INC. — free Get an email when a new federal OSHA severe-injury report for Thermal Control and Fabrication, INC. is published. One employer, no account, unsubscribe in one click.
Site address
354 HOLLINGER RD
City
CALVERT CITY
State
KY
ZIP
42029
Mailing
PO BOX 567, METROPOLIS, IL 62960
Inspection type
Unprogrammed Other (I)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
336611
Employees
4
Ownership type
A

6 citations on file for this inspection.

1915.73 D

Other-than-serious 2 instances 4 exposed
Issued
Jul 17, 2018
Penalty
Initial $2,218 · Current $1,500 Reduced
29 CFR 1915.73(d): When employees were exposed to unguarded edges of decks, platforms, flats, or similar flat surfaces, more than 5 feet above a solid surface, the edges were not guarded by adequate guardrails meeting the requirements of 29 CFR 1915.71(j)(1) and (2):    (a) William E. Strait - During the period January 18, 2017 through January 19, 2018 deck openings around aft end of engines in the upper engine room were not guarded exposing employees to fall hazard of up to 8 feet.
Recent events (2)
  • — I (O) $1500
  • — Z (S) $2218

1915.74 C02

Other-than-serious 1 instance 4 exposed
Issued
Jul 17, 2018
Abate by
Jul 23, 2018
Penalty
Initial $2,217 · Current $1,500 Reduced
29 CFR 1915.74(c)(2): A safe walkway meeting the requirements of 29 CFR 1917.74(a)(7) was not provided to step safely to or from the wharf, float, barge, or river towboat:     (a) William E. Strait - On or about January 19, 2018 a ramp was not provided to access the vessel. The William E. Strait was tied to the dock in a manner that would allow it to float away from the dock creating a space of approximately 2 feet that an employee could fall through between the deck and dock.
Recent events (2)
  • — I (O) $1500
  • — Z (S) $2217

1915.81 B01 IV C

Other-than-serious 7 instances 4 exposed
Issued
Jul 17, 2018
Abate by
Jul 27, 2018
Penalty
Initial $2,217 · Current $1,500 Reduced
29 CFR 1915.81(b)(1)(iv)(C): The employer did not place each hose and cord on walkways where the hoses and cords were covered by crossovers or other means that will prevent injury to employees and damage to the hoses and cords:    (a)  William E. Strait - On or about January 19, 2018 hoses and cords on walkways on the deck were not covered exposing employees to tripping and fall hazards.
Recent events (2)
  • — I (O) $1500
  • — Z (S) $2217

1915.158 B02

Deleted Serious Gravity 5 1 instance 4 exposed
Issued
Jul 17, 2018
Abate by
Jul 23, 2018
Penalty
Initial $2,772 · Current $0 Reduced
29 CFR 1915.158(b)(2): On floating vessels under 200 feet in length, at least one 30-inch U.S. Coast Guard approved ring life buoy with line attached were not located at the gangway:  (a)  William E. Strait - On or about January 19, 2018 a life ring with line attached was not visible and accessible.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2772

1915.508 B01

Other-than-serious 4 instances 4 exposed
Issued
Jul 17, 2018
Abate by
Aug 10, 2018
Penalty
Initial $1,662 · Current $1,100 Reduced
29 CFR 1915.508(b)(1): The employer did not ensure all employees were trained on emergency alarm signals, including system discharge and employee evacuation alarms:    (a) Shipyard - On or about January 19, 2018 the employer did not train employees as required.
Recent events (2)
  • — I (O) $1100
  • — Z (S) $1662

1915.508 B02

Serious Gravity 1 4 instances 4 exposed
Issued
Jul 17, 2018
Abate by
Aug 10, 2018
Penalty
Initial $0 · Current $0
29 CFR 1915.508(b)(2): The employer did not ensure the employees were trained on the primary and secondary evacuation routes in event of fire in the workplace:  (a) Shipyard - On or about January 19, 2018 the employer did not train employees as required.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Thermal Control and Fabrication, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342923505.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.