ALPHARETTA, GA —
OSHA Inspection: JM FRAMING, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JM FRAMING, LLC in 380 BRAEDEN WAY, ALPHARETTA, GA 30009 (NAICS 238130). OSHA activity number 342923935.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JM FRAMING, LLC
- Site address
- 380 BRAEDEN WAY
- City
- ALPHARETTA
- State
- GA
- ZIP
- 30009
- Mailing
- P.O. BOX 149, LAWRENCEVILLE, GA 30046
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 7
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.102 A01
- Issued
- Feb 15, 2018
- Penalty
- Initial $2,217 · Current $2,217
General-duty citation text
29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: (a) New residential construction, second level top plate: On or about 02/02/2018, and at times prior, the employer exposed employees to struck-by hazards while operating pneumatic framing nail guns at 120 PSI, in that protective eyewear was not provided to employees engaged in framing activities.
Recent events (1)
- — Z (S) $2217
1926.501 B13
- Issued
- Feb 15, 2018
- Penalty
- Initial $3,880 · Current $3,880
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels was not protected by guardrail systems, safety net systems, personal fall arrest systems, or an alternative fall protection measure under another provision of paragraph 1926.501 (b), nor did the employer demonstrate that it is infeasible or creates a greater hazard to use these systems and develop and implement a fall protection plan which meets the requirements of paragraph (k) of section 1926.502: (a) New residential construction located on Lot #35, Second level top plate: On or about 02/02/2018, and at times prior, the employer exposed employees to falls hazards of 23-feet, 1-inch to the lower level, in that no fall protection system was provided to employees engaged in framing activities from the top outer plates.
Recent events (1)
- — Z (S) $3880
1926.1053 A02
- Issued
- Feb 15, 2018
- Penalty
- Initial $3,326 · Current $3,326
General-duty citation text
29 CFR 1926.1053(a)(2): Ladder rungs, cleats, and/or steps were not parallel, level, and uniformly spaced when the ladder was in position for use: (a) New residential construction located on Lot #35, First floor: On or about 02/02/2018, and at times prior, the employer exposed employees to fall hazards of 11-feet, 6-inches to the lower level, in that a job made ladder provided did not have uniform rungs/cleats as the space between the rugs were spaced between 16-inches and up to 26-inches apart. the employer failed to provide safe access to the upper level.
Recent events (1)
- — Z (S) $3326
1926.1053 B13
- Issued
- Feb 15, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step: (a) New residential construction located on Lot #35, First floor: On or about 02/02/2018, and at times prior, the employer exposed employees to fall hazards of 3-feet, 8-inches to the lower level, in that employees used the top step of the stepladder to access a job-made ladder to access the second level. The employer failed to provide safe access to the upper levels of the structure.
Recent events (1)
- — Z (S) $0
More inspections at JM Framing, LLC
View JM Framing, LLC's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342923935.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.