Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: UFB FABRICATION, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of UFB FABRICATION, INC. in 4679 WORLD PARKWAY CIRCLE, BERKELEY, MO 63134 (NAICS 339950). OSHA activity number 342932761.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch UFB Fabrication, INC. — free Get an email when a new federal OSHA severe-injury report for UFB Fabrication, INC. is published. One employer, no account, unsubscribe in one click.
Site address
4679 WORLD PARKWAY CIRCLE
City
BERKELEY
State
MO
ZIP
63134
Mailing
4679 WORLD PARKWAY CIRCLE, BERKELEY, MO 63134
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
339950
Employees
35
Ownership type
A

4 citations on file for this inspection.

1910.147 C01

Serious Gravity 10 1 instance 1 exposed
Issued
Feb 14, 2018
Abate by
Apr 3, 2018
Penalty
Initial $9,054 · Current $3,900 Reduced
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:     On or about 02/06/2018, UFB Fabrication, Inc. located at 4679 World Parkway Circle, Berkeley, MO, had not established a program consisting of energy control procedures, employee training and periodic inspections.  There was equipment with more than one energy source, such as, the CNC Router had 208V electrics and 95 psi pneumatics, and the Accu-Bend Lite had 120V electrics and 125 psi pneumatics.
Recent events (2)
  • — I (S) $3900
  • — Z (S) $9054

1910.178 L01 II

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 14, 2018
Abate by
Apr 3, 2018
Penalty
Initial $6,467 · Current $3,900 Reduced
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a Power Industrial Truck:    On or about 02/06/2018, UFB Fabrication, Inc. located at 4679 World Parkway Circle, Berkeley, MO, had not ensured that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the required training.  The employer had never trained their forklift operators.
Recent events (2)
  • — I (S) $3900
  • — Z (S) $6467

1910.1200 G08

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Feb 14, 2018
Abate by
Apr 3, 2018
Penalty
Initial $5,174 · Current $0 Reduced
29 CFR 1910.1200(g)(8):   The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical:   On or about 02/06/2018, UFB Fabrication, Inc. located at 4679 World Parkway Circle, Berkeley, MO, had not established a SDS program that had SDSs readily accessible during each work shift to employees.  Various paints and thinners were some of the materials which employees were exposed.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5174

1904.32 A04

Other-than-serious 1 instance 1 exposed
Issued
Feb 14, 2018
Penalty
Initial $0 · Current $0
The employer did not post an OSHA 300A Form or equivalent by February 1 thru April 30:   On 02/06/2018, UFB Fabrication, Inc. located at 4679 World Parkway Circle, Berkeley, MO, failed to post their OSHA 300A form.  The required timeframe for such posting is from February 1st to April 30th.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342932761.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.