BELLINGHAM, MA —
OSHA Inspection: JOHN'S USED AUTOS AND PARTS, LLC
Follow-up inspection · Safety discipline
At a glance
On , OSHA opened a follow-up safety inspection of JOHN'S USED AUTOS AND PARTS, LLC in 85 HARTFORD AVENUE, BELLINGHAM, MA 02019 (NAICS 441310). OSHA activity number 342937604.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JOHN'S USED AUTOS AND PARTS, LLC
- Site address
- 85 HARTFORD AVENUE
- City
- BELLINGHAM
- State
- MA
- ZIP
- 02019
- Mailing
- 85 HARTFORD AVENUE, BELLINGHAM, MA 02019
What kind of inspection was it?
- Inspection type
- Follow-up (F)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 441310
- Employees
- 5
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.28 B11 II
- Issued
- Aug 3, 2018
- Abate by
- Sep 24, 2018
- Penalty
- Initial $2,439 · Current $975 Reduced
General-duty citation text
29 CFR 1910.28(b)(11)(ii): Each flight of stairs having at least 3 treads and at least 4 risers was not equipped with stair rail systems and handrails in accordance with Table D-2, Stairway Handrail Requirements: Facility: A stairway with approximately nine (9) tread and ten (10) risers that was approximately thirty (30) inches wide was not equipped with a stair rail system described in table D-2 exposing employees to fall hazards of up to approximately six (6) feet six (6) inches.
Recent events (2)
- — I (S) $975
- — Z (S) $2439
1910.177 C01 I
- Issued
- Aug 3, 2018
- Abate by
- Nov 15, 2018
- Penalty
- Initial $6,098 · Current $3,049 Reduced
General-duty citation text
29 CFR 1910.177(c)(1)(i): The employer did not assure that no employee services any multi-piece rim wheel unless the employee has been trained and instructed in the correct and safe operating procedures described in 29 CFR 1910.177(f) for servicing multi-piece rim wheels. Facility: Employees were servicing the multi-piece rim wheel on a John Deere 644C without training and instruction in the safe and correct procedures. John's Used Autos and Parts, LLC was previously cited for a violation of this occupational safety and health standard, which was contained in OSHA inspection number 1189344, citation number 1, item number 6, and was affirmed as a final order on January 31, 2018, with respect to a workplace located at 85 Hartford Avenue, Bellingham, MA.
Recent events (2)
- — I (R) $3049
- — Z (R) $6098
1910.177 D01
- Issued
- Aug 3, 2018
- Abate by
- Nov 15, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.177(d)(1): The employer did not furnish a restraining device for employees to use while inflating tires on multi-piece wheels: Facility: Employees servicing a multi-piece rim wheel on a John Deere 644C were not provided with a restraining device while inflating the tire. John's Used Autos and Parts, LLC was previously cited for a violation of this occupational safety and health standard, which was contained in OSHA inspection number 1189344, citation number 1, item number 7, and was affirmed as a final order on January 31, 2018, with respect to a workplace located at 85 Hartford Avenue, Bellingham, MA.
Recent events (2)
- — I (R) $0
- — Z (R) $0
1910.177 F
- Issued
- Aug 3, 2018
- Abate by
- Nov 15, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.177(f): The employer did not establish a safe operating procedure for servicing multi-piece rim wheels which contained, at a minimum, the elements listed in 29 CFR 1910.177(f)(1) through (11): Facility: The employer did not develop or implement safe operating procedures for servicing multi-piece rim wheel on a John Deere 644C. John's Used Autos and Parts, LLC was previously cited for a violation of this occupational safety and health standard, which was contained in OSHA inspection number 1189344, citation number 1, item number 8, and was affirmed as a final order on January 31, 2018, with respect to a workplace located at 85 Hartford Avenue, Bellingham, MA.
Recent events (2)
- — I (R) $0
- — Z (R) $0
1910.132 D02
- Issued
- Aug 3, 2018
- Abate by
- Sep 24, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification which included the requirements as outlined in 29 CFR 1910.132(d)(2): Facility: The employer failed to certify that a workplace hazard assessment had been completed as required.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at John'S Used Autos and Parts, LLC
View John'S Used Autos and Parts, LLC's full OSHA safety record →
More inspections in this industry (NAICS 441310)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342937604.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.