Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DEERFIELD PACKAGING SERVICE, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of DEERFIELD PACKAGING SERVICE, INC. in 199 INDUSTRIAL BLVD, TURNERS FALLS, MA 01376 (NAICS 332212). OSHA activity number 342939782.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Deerfield Packaging Service, INC. — free Get an email when a new federal OSHA severe-injury report for Deerfield Packaging Service, INC. is published. One employer, no account, unsubscribe in one click.
Site address
199 INDUSTRIAL BLVD
City
TURNERS FALLS
State
MA
ZIP
01376
Mailing
199 INDUSTRIAL BLVD, TURNERS FALLS, MA 01376
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332212
Employees
100
Ownership type
A

4 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 10, 2018
Abate by
Jun 15, 2018
Penalty
Initial $9,054 · Current $6,741 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:     199 Industrial Blvd, Turners Falls, MA    On February 5, 2018 and at times prior, employees set up and replaced sanding belts on machines without utilizing the energy control procedures that required isolating and locking out of energy sources.  On February 5, 2018, an employee received a fingertip amputation injury while making adjustments to a Schmidt Roll Marker Machine that was not locked out.
Recent events (2)
  • — I (S) $6740.5
  • — Z (S) $9054

1910.147 C06 I

Serious Gravity 10 1 instance 20 exposed
Issued
Apr 10, 2018
Abate by
Jun 15, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:    199 Industrial Blvd, Turners Falls, MA    As of February 9, 2018, the employer had not performed a periodic inspection that ensured each procedure was inspected for inaccuracies during an actual energy control task and did not include a review, between the inspector and each authorized employee, of that employee's responsibilities under the energy control procedure.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.212 A03 II

Serious Gravity 10 1 instance 10 exposed
Issued
Apr 10, 2018
Abate by
Jun 15, 2018
Penalty
Initial $9,054 · Current $6,741 Reduced
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):      199 Industrial Blvd, Turners Falls, MA    On February 5, 2018 and at times prior, employees operated a Schmidt Roll Marker machine that had no point of operation guarding.  While depressing the single foot pedal, employees were able to reach the part-stamping danger zone.
Recent events (2)
  • — I (S) $6740.5
  • — Z (S) $9054

1910.147 C04 II B

Other-than-serious 1 instance 1 exposed
Issued
Apr 10, 2018
Abate by
Jun 15, 2018
Penalty
Initial $9,054 · Current $100 Reduced
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy.    199 Industrial Blvd, Turners Falls, MA    On February 5, 2018 and at times prior, the energy control procedure for a Schmidt Roll Marker machine was not accurate due to changes to the hazardous energy sources and methods available to lock them out.
Recent events (2)
  • — I (O) $100
  • — Z (S) $9054

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342939782.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.