ANACONDA, MT —
OSHA Inspection: S AND N CONCRETE
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of S AND N CONCRETE in 182 ABC DRIVE, ANACONDA, MT 59711 (NAICS 327390). OSHA activity number 342947298.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- S AND N CONCRETE
- Site address
- 182 ABC DRIVE
- City
- ANACONDA
- State
- MT
- ZIP
- 59711
- Mailing
- 182 ABC DRIVE, ANACONDA, MT 59711
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327390
- Employees
- 16
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.28 B02 I
- Issued
- Mar 13, 2018
- Abate by
- Apr 6, 2018
- Penalty
- Initial $1,885 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.28(b)(2)(i): The employer did not ensure employees in a hoist area were protected from falling 4 feet or more to a lower level: a. Batch Plant: On or about February 12, 2018, and at times prior, employees were exposed to fall hazards of approximately 6 feet to the ground below while accessing and performing loading operations on the Batch Plant Stairway Landing without a midrail.
Recent events (2)
- — I (O) $1500
- — Z (S) $1885
1910.28 B11 I
- Issued
- Mar 13, 2018
- Abate by
- Apr 6, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.28(b)(11)(i): Each employee exposed to an unprotected side or edge of a stairway landing that was 4 feet (1.2 m) or more above a lower level was not protected by a guardrail or stair rail system: a. Batch Plant: On or about February 12, 2018, and at times prior, employees were exposed to fall hazards of eight risers and nine runs while accessing and egressing the stairway without a midrail.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.212 A01
- Issued
- Mar 13, 2018
- Abate by
- Apr 6, 2018
- Penalty
- Initial $1,885 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a. Machine Shop: On or about February 12, 2018, and at times prior, employees were exposed to struck by hazards while operating an unguarded Atlas Shop Press. b. Machine Shop: On or about February 12, 2018, and at times prior, employees were exposed to struck by hazards from flying chips and sparks while operating an unguarded Craftsman Professional 17 inch Drill Press.
Recent events (2)
- — I (O) $1500
- — Z (S) $1885
1910.215 B09
- Issued
- Mar 13, 2018
- Abate by
- Apr 6, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a. Machine Shop: On or about February, 12, 2018, and at times prior, employees were exposed to struck by hazards from fragmentation of the abrasive wheel while sharpening tools and bits on the Van Dorn 10 inch Bench Grinder without a tongue guard in place.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.147 C04 I
- Issued
- Mar 13, 2018
- Abate by
- Apr 6, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a. S and N Concrete: On or about February 12, 2018, and at times prior, the employer failed to document a written energy control procedure for employees performing maintenance on equipment that had the potential for unexpected energization.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 327390)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342947298.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.