MONTVALE, NJ —
OSHA Inspection: VELECELA'S CONSTRCUTION LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of VELECELA'S CONSTRCUTION LLC in 99 SPRING VALLEY RD, MONTVALE, NJ 07645 (NAICS 238170). OSHA activity number 342951738.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VELECELA'S CONSTRCUTION LLC
- Site address
- 99 SPRING VALLEY RD
- City
- MONTVALE
- State
- NJ
- ZIP
- 07645
- Mailing
- 339 VALLEY RD, WEST ORANGE, NJ 07052
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.102 A01
- Issued
- May 10, 2018
- Penalty
- Initial $3,326 · Current $1,996 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury: a) Building Exterior: An employee operating a DEWALT Miter Saw while cutting siding material was not wearing any eye and face protection, on or about 2/9/2018
Recent events (2)
- — I (S) $1995.6
- — Z (S) $3326
1926.300 B04 II
- Issued
- May 10, 2018
- Penalty
- Initial $3,880 · Current $2,328 Reduced
General-duty citation text
29 CFR 1926.300(b)(4)(ii): The point of operation of machine(s) whose operation exposed an employee to injury was not guarded: a) Building Exterior: An employee was exposed to an amputation hazard while using a DEWALT Miter Saw with the blade exposed. The guard was secured with a screw to maintain the blade exposed while cutting siding material, on or about 2/9/2018
Recent events (2)
- — I (S) $2328
- — Z (S) $3880
1926.304 H01
- Issued
- May 10, 2018
- Penalty
- Initial $3,880 · Current $2,328 Reduced
General-duty citation text
29 CFR 1926.304(h)(1): Each circular crosscut table saw was not guarded by a hood which completely enclosed that portion of the saw blade above the table and that portion of the saw above the material being cut: a) Building Exterior: An employee was exposed to an amputation hazard while using a BOSCH Table Saw with the blade exposed. The employee was cutting siding material, on or about 2/9/2018
Recent events (2)
- — I (S) $2328
- — Z (S) $3880
1926.501 B13
- Issued
- May 10, 2018
- Penalty
- Initial $3,880 · Current $2,328 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) Building Exterior: Employees engaged in siding work on a two story residential home were exposed to an elevated height of 10 feet above the ground surface, without a personal fall arrest system or standard guard rails system or other feasible means of fall protection on or about 2/9/2018.
Recent events (2)
- — I (S) $2328
- — Z (S) $3880
More inspections in this industry (NAICS 238170)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342951738.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.