MC FARLAND, WI —
OSHA Inspection: CONVENIENCE ELECTRONICS, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of CONVENIENCE ELECTRONICS, INC. in 4405 TRIANGLE ST, MC FARLAND, WI 53558 (NAICS 423690). OSHA activity number 342962271.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONVENIENCE ELECTRONICS, INC.
- Site address
- 4405 TRIANGLE ST
- City
- MC FARLAND
- State
- WI
- ZIP
- 53558
- Mailing
- 4405 TRIANGLE ST, MC FARLAND, WI 53558
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423690
- Employees
- 40
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.303 B02
- Issued
- May 31, 2018
- Abate by
- Jul 20, 2018
- Penalty
- Initial $6,467 · Current $3,556 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: On or about February 21, 2018 electrical power strips and romex wiring were not used according to the UL listing and labeling.
Recent events (2)
- — I (S) $3556
- — Z (S) $6467
1910.1025 L01 I
- Issued
- May 31, 2018
- Abate by
- Jul 20, 2018
- Penalty
- Initial $3,880 · Current $2,134 Reduced
1591
General-duty citation text
29 CFR 1910.1025(l)(1)(i): Employee(s) working in an area where there is potential exposure to airborne lead at any level were not informed of the content of Appendices A and B of 29 CFR 1910.1025: On or about February 21, 2018 employees using lead containing solder were not informed of the health hazards of lead as specified in Appendices A and B.
Recent events (2)
- — I (S) $2134
- — Z (S) $3880
1910.1200 E01
- Issued
- May 31, 2018
- Abate by
- Jul 20, 2018
- Penalty
- Initial $0 · Current $0
07312431Z100
General-duty citation text
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii): On or about February 21, 2018 the company did not develop a written hazard communication program to convey the occupational health and safety hazards of soldering metals.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1904.41 A02
- Issued
- May 31, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.41(a)(2): 29 CFR 1904.41(a)(2) Annual electronic submission of OSHA Form 300A Summary of Work-Related Injuries and Illnesses by establishments with 20 or more employees but fewer than 250 employees in designated industries. If your establishment had 20 or more employees but fewer than 250 employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix A to subpart E of this part, then you must electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the form. On or about December 15, 2017, the employer failed to submit their 300A Summary of Work-Related Injuries and Illnesses to OSHA for calendar year 2016.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1025 D02
- Issued
- May 31, 2018
- Abate by
- Aug 30, 2018
- Penalty
- Initial $0 · Current $0
1591
General-duty citation text
29 CFR 1910.1025(d)(2): An initial determination was not made to determine if any employee may be exposed to lead at or above the action level: On or about February 21, 2018 employees lead exposure was not determined when using lead containing solder.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 423690)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342962271.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.