Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: APPLIED IMAGE INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of APPLIED IMAGE INC. in 1653 EAST MAIN STREET, ROCHESTER, NY 14609 (NAICS 334516). OSHA activity number 342962362.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Applied Image INC. — free Get an email when a new federal OSHA severe-injury report for Applied Image INC. is published. One employer, no account, unsubscribe in one click.
Establishment
APPLIED IMAGE INC.
Site address
1653 EAST MAIN STREET
City
ROCHESTER
State
NY
ZIP
14609
Mailing
1653 EAST MAIN STREET, ROCHESTER, NY 14609
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
334516
Employees
24
Ownership type
A

5 citations on file for this inspection.

1910.147 C01

Serious Gravity 1 1 instance 2 exposed
Issued
Feb 28, 2018
Abate by
Apr 2, 2018
Penalty
Initial $2,217 · Current $1,663 Reduced
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:    a) On or about 02/21/18 in the Glass Finishing shop; employees who performed service and maintenance, such as but not limited to, changing the grinding wheel on the Bothner grinder, were exposed to a laceration hazard when the employer did not have an energy control program and conduct employee training to ensure prior to employees conducting service and maintenance work on equipment they followed energy isolation and control procedures.      ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $1662.75
  • — Z (S) $2217

1910.212 A01

Serious Gravity 1 1 instance 2 exposed
Issued
Feb 28, 2018
Abate by
Apr 12, 2018
Penalty
Initial $2,217 · Current $1,663 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by rotating parts of the gearing on the side of the machine:     a) On or about 02/21/18 in the Glass Finishing Shop; employees were exposed to the nip point created by the rotating gearing on the Bothner grinder when the left and right side covers were not secured allowing access to the gearing while the grinder was being used.      ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $1662.75
  • — Z (S) $2217

1910.212 A04

Serious Gravity 1 1 instance 1 exposed
Issued
Feb 28, 2018
Abate by
Apr 2, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.212(a)(4): Revolving container(s) were not guarded by enclosure(s) which were interlocked with the drive mechanism so that the container(s) could not revolve unless the enclosure(s) were in place:  a) On or about 02/21/18 in the tumbler area; employees were exposed to a stuck by hazard when the access gate to the container tumbler area was not interlocked with the tumbler drive mechanism.  ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.151 C

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 28, 2018
Abate by
Apr 12, 2018
Penalty
Initial $2,956 · Current $2,217 Reduced
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:    a) On or about 02/21/18 in the Clean Room Lab; employees were exposed to injuries from using corrosive liquids, such as but not limited to, sulfuric acid 52-100%, when the employer did not provide suitable eye wash facilities.      ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $2217
  • — Z (S) $2956

1910.1200 E01

Other-than-serious 1 instance 6 exposed
Issued
Feb 28, 2018
Abate by
Apr 2, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  a) On or about 02/21/18 throughout the facility; employees were exposed to contact with hazardous chemicals, such as but not limited to, sulfuric acid ( corrosive ), isopropyl alcohol ( flammable) ethyl alcohol ( flammable), when the employer did not have or implement a written Hazard Communication program.    ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Applied Image INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342962362.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.