ROLLING MEADOWS, IL —
OSHA Inspection: ALL-BRITE GLASS & MIRROR CO.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ALL-BRITE GLASS & MIRROR CO. in 2800-2850 GOLF RD., ROLLING MEADOWS, IL 60008 (NAICS 238150). OSHA activity number 342978152.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALL-BRITE GLASS & MIRROR CO.
- Site address
- 2800-2850 GOLF RD.
- City
- ROLLING MEADOWS
- State
- IL
- ZIP
- 60008
- Mailing
- 1715 W. ARMITAGE CT., ADDISON, IL 60101
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238150
- Employees
- 3
- Ownership type
- A
Citations
7 citations on file for this inspection.
1926.453 B02 V
- Issued
- Jul 17, 2018
- Abate by
- Sep 21, 2018
- Penalty
- Initial $3,880 · Current $2,330 Reduced
General-duty citation text
29 CFR 1926.453(b)(2)(v): A body belt was not worn and/or a lanyard was not attached to the boom or basket when working from an aerial lift: Note: As of January 1, 1998, subpart M of this part (1926.502(d)) provides that body belts are not acceptable as part of a personal fall arrest system. a) On February 22, 2018, personal fall arrest equipment used by an employee operating and working from a JLG Model 800AJ aerial lift was not attached to the designated anchor points on the basket of the lift. b) On February 22, 2018, an employee was exposed to the hazard of falling between approximately 9 to 25 feet from a JLG Model 800AJ aerial lift because a full body harness was not worn with a lanyard attached to the boom or basket while working from the aerial lift.
Recent events (2)
- — I (S) $2330
- — Z (S) $3880
1926.502 D06 I
- Issued
- Jul 17, 2018
- Abate by
- Jul 23, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.502(d)(6)(i): Snap hooks were engaged directly to webbing, rope or wire rope when not designed for such connections: a) On or about February 22, 2018, an employee wrapped his lanyard around the guardrail of a JLG Model 800AJ aerial lift and engaged the snap hook back on to the lanyard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.453 A02
- Issued
- Jul 17, 2018
- Abate by
- Jul 23, 2018
- Penalty
- Initial $3,880 · Current $2,330 Reduced
General-duty citation text
29 CFR 1926.453(a)(2): Aerial lift was "field modified" for uses other than those intended by the manufacturer and the modification was not certified in writing by the manufacturer or by any other equivalent entity, such as a nationally recognized testing laboratory, to be in conformity with all applicable provisions of ANSI A92.2-1969 and this section and to be at least as safe as the equipment was before the modification: a) On February 22, 2018, employees used a JLG Model 800AJ aerial lift to transport a glass panel on metal bars the employer fabricated and installed on the midrail of the basket.
Recent events (2)
- — I (S) $2330
- — Z (S) $3880
1926.453 B02 VI
- Issued
- Jul 17, 2018
- Abate by
- Jul 23, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.453(b)(2)(vi): Boom and Basket load limits specified by the manufacturer were exceeded: The basket load limit was exceeded on the JLG Model 800AJ in the following instances: a) On February 22, 2018, three employees were working in the basket of an aerial lift capable of transporting two employees in the basket. b) On February 22, 2018, the employer provided for use an aerial lift where the employees and the glass panel they were removing exceeded the 500 pound load limit set by the manufacturer.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.501 B14
- Issued
- Jul 17, 2018
- Abate by
- Jul 23, 2018
- Penalty
- Initial $3,326 · Current $1,810 Reduced
General-duty citation text
29 CFR 1926.501(b)(14): Each employee working on, at, above, or near wall openings (including those with chutes attached) where the outside bottom edge of the wall opening is 6 feet or move above lower levels and the inside bottom edge of the wall opening is less than 39 inches above the walking/working surface, were not protected from falling by the use of a guardrail system, a safety net system, or a personal fall arrest system: a) On February 22, 2018, employees were performing glazing work on the second floor of a commercial building and were exposed to falls to the ground between approximately 9 to 23 feet through an unguarded wall opening.
Recent events (2)
- — I (S) $1810
- — Z (S) $3326
1926.454 A
- Issued
- Jul 17, 2018
- Abate by
- Sep 21, 2018
- Penalty
- Initial $3,880 · Current $2,330 Reduced
General-duty citation text
29 CFR 1926.454(a)Employee(s) performing work while on scaffolds were not trained by a qualified person to recognize the hazards associated with the type of scaffolding being used and to understand the procedures to control or minimize those hazards: a) On February 22, 2018, the employer did not ensure that each employee was provided with training in the recognition and control of the hazards associated with working from aerial lift scaffolding being used at the site.
Recent events (2)
- — I (S) $2330
- — Z (S) $3880
1926.503 A01
- Issued
- Jul 17, 2018
- Abate by
- Sep 21, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee who might be exposed to fall hazards, to enable each employee to recognize fall hazards and the procedures to be followed in order to minimize these hazards: a) On February 22, 2018, employees were exposed to fall hazards and the employer did not provide a training program to recognize fall hazards and the procedures to be followed in order to minimize these hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 238150)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342978152.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.