INGLESIDE, TX —
OSHA Inspection: SUBSEA 7 (US) LLC
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of SUBSEA 7 (US) LLC in 2269 AVENUE B, INGLESIDE, TX 78362 (NAICS 331210). OSHA activity number 342985843.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SUBSEA 7 (US) LLC
- Site address
- 2269 AVENUE B
- City
- INGLESIDE
- State
- TX
- ZIP
- 78362
- Mailing
- 17220 KATY FREEWAY SUITE 100, HOUSTON, TX 77094
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331210
- Employees
- 116
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.134 E01
- Issued
- May 4, 2018
- Abate by
- May 31, 2018
- Penalty
- Initial $5,543 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: On or about March 1, 2018 in the beveling shop area of the main production line for coiled pipe, the employer did not provide a medical evaluation as required for an employee who wears a powered air purifying respirator while grinding ends of pipe.
Recent events (2)
- — I (S) $3000
- — Z (S) $5543
1910.147 C04 II B
- Issued
- May 4, 2018
- Abate by
- May 31, 2018
- Penalty
- Initial $12,934 · Current $9,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy: On or about February 28, 2018, and at times prior thereto, in the beveling area of the main production line, the employer did not develop specific lockout/tagout procedures for the pipe rack area.
Recent events (2)
- — I (S) $9000
- — Z (S) $12934
1910.147 D
- Issued
- May 4, 2018
- Abate by
- May 31, 2018
- Penalty
- Initial $12,934 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): On or about February 28, 2018, in the beveling area of the main production line, the employer did not perform the following lockout/tagout steps: a. Informing employees of the methods of controlling energy; b. Turning off or shutting down equipment; c. Isolating machine using isolating devices; d. Applying lockout/tagout devices; e. Removing stored energy; f. Verifying isolation and deenergization.
Recent events (2)
- — I (S) $0
- — Z (S) $12934
1910.147 C07 I C
- Issued
- May 4, 2018
- Abate by
- May 31, 2018
- Penalty
- Initial $12,934 · Current $9,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(C): Employees whose work operations are in an area where energy control procedures are utilized were not instructed about the procedure: On or about February 28, 2018, and at times prior thereto, in the beveling area of the main production line, the employer did not inform affected employees on lockout/tagout procedures for the pipe rack area.
Recent events (2)
- — I (S) $9000
- — Z (S) $12934
1910.212 A01
- Issued
- May 4, 2018
- Penalty
- Initial $12,934 · Current $9,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about February 28, 2018, and at times prior thereto, in the beveling area of the main production line, the employer did not guard the pipe rack.
Recent events (2)
- — I (S) $9000
- — Z (S) $12934
More inspections in this industry (NAICS 331210)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342985843.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.