Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GOEBELWOOD INDUSTRIES, INC.

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of GOEBELWOOD INDUSTRIES, INC. in 100 SYCAMORE AVENUE, FOLSOM, PA 19033 (NAICS 337110). OSHA activity number 342992781.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Goebelwood Industries, INC. — free Get an email when a new federal OSHA severe-injury report for Goebelwood Industries, INC. is published. One employer, no account, unsubscribe in one click.
Site address
100 SYCAMORE AVENUE
City
FOLSOM
State
PA
ZIP
19033
Mailing
100 SYCAMORE AVENUE, FOLSOM, PA 19033
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
337110
Employees
18
Ownership type
A

5 citations on file for this inspection.

1910.22 A02

Other-than-serious 1 instance 10 exposed
Issued
Aug 22, 2018
Abate by
Sep 4, 2018
Penalty
Initial $3,696 · Current $3,370 Reduced
29 CFR 1910.22(a)(2): (2) The floor of each workroom is maintained in a clean condition:     a) Facility floors behind all equipment: The employer did not ensure that work areas were free from excess materials, including, but not limited to scrap wood, wood debris, and wood dust, thus exposing employees to fire hazards. Floors and walkways in the facility are not kept clean allowing for dust, debris, wood and other flammable and combustible materials to build up.    This condition noted/observed on/about 05 MAR 2018.
Recent events (3)
  • — F (O) $3370
  • — C (S) $3696
  • — Z (S) $3696

1910.134 C01

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Aug 22, 2018
Abate by
Oct 10, 2018
Penalty
Initial $3,696 · Current $0 Reduced
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:  a) Facility: The employer did not have a written respiratory protection program for employees required to  wear tightfitting respirators such as, but not limited to the Honeywell 7700-30M tight fitting respirator with organic vapor cartridges, Honeywell N75001L, ect.,while conducting painting operations.  Condition observed/noted on/about 05 MAR 2018.
Recent events (3)
  • — F (S) $0
  • — C (S) $3696
  • — Z (S) $3696

1910.134 E01

Other-than-serious 1 instance 2 exposed
Issued
Aug 22, 2018
Abate by
Oct 10, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:     a) Facility, spray booth: The employer did not ensure employees required to wear respirators such as, the Honeywell 7700-30M tight fitting respirator, were medically evaluated prior to use. Employees are required to wear respirators during sanding, painting, and priming operations and are not medically evaluated and cleared to wear such respirators.     This condition noted/observed on/about 05 MAR 2018.
Recent events (3)
  • — F (O) $0
  • — C (S) $0
  • — Z (S) $0

1910.134 F02

Other-than-serious 2 instances 2 exposed
Issued
Aug 22, 2018
Abate by
Sep 4, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.134(f)(2): The employer shall ensure that an employee using a tight-fitting facepiece respirator is fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter.    a) Facility, spray booth: The employer did not provide respirator fit testing for employees required to wear tight fitting respirators such as: Honeywell 7700-30M respirator, while performing painting operations in the spray booth.        Condition observed/noted on/about 05 MAR 2018.
Recent events (3)
  • — F (O) $0
  • — C (S) $0
  • — Z (S) $0

1910.1200 F06 I

Other-than-serious 1 instance 2 exposed
Issued
Aug 22, 2018
Abate by
Aug 28, 2018
Penalty
Initial $2,956 · Current $2,630 Reduced
29 CFR 1910.1200(f)(6)(i): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the information required by 29 CFR 1910.1200(f)(1)(i) through 29 CFR 1910.1200(f)(1)(v)    1) Facility, painting area: The employer did not ensure that two 1 gallon metal containers containing various paints, and primers were not labeled with the identity of hazardous chemicals contained therein.      Condition noted/observed on/about 05 MAR 2018.
Recent events (3)
  • — F (O) $2630
  • — C (S) $2956
  • — Z (S) $2956

View Goebelwood Industries, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342992781.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.