OSHA Inspection: RICKY FREEMAN

Issued

Oct 15, 2018

Abate by

Nov 19, 2018

Penalty

Initial $311 · Current $311

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  (a) On or about 10/15/2018, the employer failed to submit certification of corrective action for citation 1, item 2 issued on 09/04/2018 with an abatement due date of  09/14/2018.  (b) On or about 10/15/2018, the employer failed to submit certification of corrective action for citation 1, item 5 issued on 09/04/2018 with an abatement due date of 09/14/2018.

Issued

Sep 4, 2018

Abate by

Oct 22, 2018

Penalty

Initial $2,217 · Current $2,217

General-duty citation text

29 CFR 1910.22(a)(2): The floor of each workroom was not maintained in a clean condition:   a) On or about March 6, 2018 - Facility, combustible dust, generated during the production processes, had accumulated on the floors of the work areas, exposing employees to fire hazards.  b) On or about March 6, 2018 - Facility, lumber had accumulated on the floors of the work areas, exposing employees to trip hazards.

Issued

Sep 4, 2018

Abate by

Sep 14, 2018

Penalty

Initial $2,217 · Current $2,217

General-duty citation text

29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:  a) On or about March 6, 2018 - Facility, a designated exit route was obstructed with lumber and sawdust that had accumulated on the floor.

Issued

Sep 4, 2018

Abate by

Oct 22, 2018

Penalty

Initial $2,217 · Current $2,217

General-duty citation text

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:   a) On or about March 6, 2018 - Facility, an energy control program had not been established for equipment such as, but not limited to, multi-cut band resaw, scragg mill and triple head saw.

Issued

Sep 4, 2018

Abate by

Oct 22, 2018

Penalty

Initial $2,217 · Current $2,217

General-duty citation text

29 CFR 1910.265(c)(20)(ii): Machine(s) that created dust, shavings, chips, or slivers during a period of time equal to or greater than one-fourth of the working day were not equipped with collecting system(s):  a) On or about March 6, 2018 - Facility, machines such as, but not limited to, multi-cut band resaw and scragg mill were not equipped with dust collection systems that removed dust, generated during the production processes.

Issued

Sep 4, 2018

Abate by

Sep 14, 2018

Penalty

Initial $1,663 · Current $1,663

General-duty citation text

29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:  a) On or about March 6, 2018 - Facility, an electrical panel was blocked by sawdust and lumber that had accumulated in the area.