SHELTON, WA —
OSHA Inspection: LITTLE CREEK CASINO RESORT
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of LITTLE CREEK CASINO RESORT in 91 W STATE ROUTE 108, SHELTON, WA 98584 (NAICS 721120). OSHA activity number 342999430.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LITTLE CREEK CASINO RESORT
- Site address
- 91 W STATE ROUTE 108
- City
- SHELTON
- State
- WA
- ZIP
- 98584
- Mailing
- 91 W STATE ROUTE 108, SHELTON, WA 98584
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 721120
- Employees
- 799
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.212 B
- Issued
- Apr 17, 2018
- Penalty
- Initial $5,543 · Current $2,772 Reduced
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: A) In the Maintenance shop, there was a free standing drill press that was not secured to the floor.
Recent events (2)
- — I (S) $2771.5
- — Z (S) $5543
1910.213 C01
- Issued
- Apr 17, 2018
- Penalty
- Initial $9,239 · Current $4,620 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: A) In the maintenance shop there was a circular table saw that was being used without and adjustable hood guard.
Recent events (2)
- — I (S) $4619.5
- — Z (S) $9239
1910.213 C02
- Issued
- Apr 17, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: A) In the maintenance shop there was a circular table saw that did not have a spreader installed.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Apr 17, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: A) In the maintenance shop, there was a circular table saw that did not have anti-kickback fingers installed.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 A04
- Issued
- Apr 17, 2018
- Penalty
- Initial $5,543 · Current $2,772 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: A) In the maintenance shop, there was a bench grinder that had the work rest 3/8 of an inch from the surface of the grinding wheel.
Recent events (2)
- — I (S) $2771.5
- — Z (S) $5543
1910.215 B09
- Issued
- Apr 17, 2018
- Penalty
- Initial $5,543 · Current $2,772 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: A) In the maintenance shop, there was a bench grinder that did not have a properly adjusted work rest.
Recent events (2)
- — I (S) $2771.5
- — Z (S) $5543
1910.263 E01 VIII
- Issued
- Apr 17, 2018
- Penalty
- Initial $5,543 · Current $2,772 Reduced
General-duty citation text
29 CFR 1910.263(e)(1)(viii): Horizontal dough mixer(s) were not equipped with a full enclosure over the bowl while the agitator was in motion: A) In the northwest corner of the Buffet kitchen, there was a floor mounted large mixer that did not have a guard enclosure that covered the bowl.
Recent events (2)
- — I (S) $2771.5
- — Z (S) $5543
1910.303 G02 I D
- Issued
- Apr 17, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(2)(i)(D): Except as elsewhere required or permitted by this standard, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by elevation of 2.44 m (8.0 ft) or more above the floor or other working surface: A) IN the deli beverage closet, there was a fluorescent light bar that was exposed to damage.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Little Creek Casino Resort
View Little Creek Casino Resort's full OSHA safety record →
More inspections in this industry (NAICS 721120)
More inspections in WA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342999430.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.