Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ATLANTIC TESTING LABORATORIES LIMITED

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of ATLANTIC TESTING LABORATORIES LIMITED in 80 LINCOLN ST, CANTON, NY 13617 (NAICS 541620). OSHA activity number 343009247.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Atlantic Testing Laboratories Limited — free Get an email when a new federal OSHA severe-injury report for Atlantic Testing Laboratories Limited is published. One employer, no account, unsubscribe in one click.
Site address
80 LINCOLN ST
City
CANTON
State
NY
ZIP
13617
Mailing
22 CORPORATE DR, CLIFTON PARK, NY 12065
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
541620
Employees
20
Ownership type
A

5 citations on file for this inspection.

1910.177 C01 I

Serious Gravity 10 2 instances 3 exposed
Issued
Jul 17, 2018
Abate by
Jul 25, 2018
Penalty
Initial $11,641 · Current $12,159
29 CFR 1910.177(c)(1)(i): The employer did not assure that no employee services any single piece rim wheel unless the employee has been trained and instructed in the correct and safe operating procedures described in 29 CFR 1910.177(g) for servicing.      a) 80 Lincoln Ave, Canton NY 13617, On or about 3/9/18: An untrained employee was allowed to service a single piece dismounted rim wheel on a flat concrete floor without receiving training or instruction  in the safe procedures to be used to protect themselves from side wall/bead failure.    b) 80 Lincoln Ave, Canton NY 13617, On or about 3/9/18: Employees were allowed to service a single piece dismounted rim wheels on a flat concrete floor without receiving training or instruction in the safe procedures to be used to protect themselves from side wall/bead failure.
Recent events (2)
  • — I (S) $12158.6
  • — Z (S) $11641

1910.177 C02

Serious Gravity 10 2 instances 3 exposed
Issued
Jul 17, 2018
Abate by
Jul 25, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.177(c)(2): The employer did not assure that each employee demonstrated his ability to safely service rim wheels by effective performance of all tasks listed in 29 CFR 1910.177(c)(2)(i) through (viii).    a) 80 Lincoln St, Canton, NY 13617, On or about 3/9/18: An employee serviced a single piece rim wheel in an unmounted, uncontained and unsecured environment. The employee had not been evaluated on  their performance on how to safely service single piece rim wheels.   b) 80 Lincoln St, Canton, NY 13617, On or about 3/9/18:   Employees  service  single piece rim wheels in an unmounted, uncontained and unsecured environment. The employees had not been evaluated on  their performance on how to safely service these single piece rim wheels.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.177 D02

Serious Gravity 10 1 instance 1 exposed
Issued
Jul 17, 2018
Abate by
Jul 25, 2018
Penalty
Initial $11,641 · Current $12,934
29 CFR 1910.177(d)(2): The employer did not provide a restraining device or a barrier to be used when inflating tires on single piece rim wheels which are not bolted onto the vehicles.    a) 80 Lincoln St, Canton, NY 13617, On or about 3/9/18: An employee was servicing (inflating)  a single piece rim wheel assembly on the concrete floor without using  the available tire changing machine or a rated strap as a restraining device,  a barrier such as a cage for containment,  or securing it to an axle mount.        b) 80 Lincoln St, Canton, NY 13617, On or about 3/9/18: Employees  service (inflated) single piece rim wheel assemblies  with out using a rated strap as a restraining device,  a barrier such as a cage for containment,  or securing it to an axle mount.
Recent events (2)
  • — I (S) $12934
  • — Z (S) $11641

1910.177 D04 I

Serious Gravity 10 1 instance 1 exposed
Issued
Jul 17, 2018
Abate by
Jul 25, 2018
Penalty
Initial $11,641 · Current $0 Reduced
29 CFR 1910.177(d)(4)(i): The employer did not furnish an air line assembly which included a clip-on chuck for inflating tires on rim wheels.    a) 80 Lincoln St, Canton, NY 13617, On or about 3/9/18: A mechanic was using an airline that did not include a clip on air chuck to inflate a single piece rim wheel assembly. The lack of this clip required the employee to be inside the trajectory of the flying assembly once it became airborne.
Recent events (2)
  • — I (S) $0
  • — Z (S) $11641

1910.177 G

Serious Gravity 10 2 instances 3 exposed
Issued
Jul 17, 2018
Abate by
Jul 25, 2018
Penalty
Initial $11,641 · Current $12,159
29 CFR 1910.177(g): The employer did not establish a safe operating procedure for servicing single piece rim wheels which contained, at a minimum, the elements listed in 29 CFR 1910.177(g)(1) through (12).    a) 80 Lincoln St, Canton, NY 13617, On or about 3/9/18:  An employee was exposed to  impact hazards of flying wheel components due to the lack of established safe operating procedures while servicing single piece rim wheel assemblies.       b) 80 Lincoln St, Canton, NY 13617, On or about 3/9/18:  Mechanics were exposed to  impact hazards of flying wheel components due to the lack of established safe operating procedures while servicing single piece rim wheel assemblies.
Recent events (2)
  • — I (S) $12158.6
  • — Z (S) $11641

View Atlantic Testing Laboratories Limited's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343009247.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.