TERRYVILLE, CT —
OSHA Inspection: ELM PRESS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ELM PRESS, INC. in 16 TREMCO DRIVE, TERRYVILLE, CT 06786 (NAICS 323110). OSHA activity number 343014155.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ELM PRESS, INC.
- Site address
- 16 TREMCO DRIVE
- City
- TERRYVILLE
- State
- CT
- ZIP
- 06786
- Mailing
- 16 TREMCO DRIVE, TERRYVILLE, CT 06786
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323110
- Employees
- 22
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.36 D01
- Issued
- May 9, 2018
- Abate by
- Jun 26, 2018
- Penalty
- Initial $2,956 · Current $1,478 Reduced
General-duty citation text
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: A. On or about April 12, 2018, in the following instances, exit doors were unable to be opened: 1. Press Department: The side exit door was dead-bolt locked during building occupancy. 2. Behind the Roto Press: The panic bar on the emergency exit door had been removed and the door would not open without a pin being removed.
Recent events (2)
- — I (S) $1478
- — Z (S) $2956
1910.132 C
- Issued
- May 9, 2018
- Abate by
- Jun 26, 2018
- Penalty
- Initial $3,696 · Current $1,848 Reduced
General-duty citation text
29 CFR 1910.132(c): Personal protective equipment was not of safe design and construction for the work to be performed: A. On or about April 12, 2018, Warehouse: Where employees operating the Raymond reach truck were working at elevation, the six-foot long lanyard provided for use with a five point harness would allow the operator to contact the lower level.
Recent events (2)
- — I (S) $1848
- — Z (S) $3696
1910.132 D02
- Issued
- May 9, 2018
- Abate by
- Jun 26, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment: A. On or about April 12, 2018, Facility-Wide: The employer had not certified that a workplace hazard assessment had been conducted to identify appropriate personal protective equipment for each task.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 IV
- Issued
- May 9, 2018
- Abate by
- Jun 26, 2018
- Penalty
- Initial $2,956 · Current $1,478 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date: A. On or about April 12, 2018, Facility-Wide: The employer had not documented training in lockout/tagout procedures for authorized, affected or other employees.
Recent events (2)
- — I (S) $1478
- — Z (S) $2956
1910.178 L04 III
- Issued
- May 9, 2018
- Abate by
- Jun 26, 2018
- Penalty
- Initial $2,956 · Current $1,478 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: A. On or about April 12, 2018, Warehouse: Employees who were allowed to operate the company's powered industrial trucks had not been provided training or evaluation within the past three years. The most recent documented training was in 2010.
Recent events (2)
- — I (S) $1478
- — Z (S) $2956
1904.41 A02
- Issued
- May 9, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.41(a)(2): The establishment had 20 or more but fewer than 250 employees at any time during the previous calendar year, and the establishment was classified as an industry listed in appendix A to subpart E of this part, but did not electronically submit information from OSHA 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. The employer did not submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the form: A. Located at Elm Press, Inc., 16 Tremco Drive, Terryville, Connecticut: On or about April 12, 2018, and times prior thereto, the employer failed to electronically submit information from their OSHA Form 300A Summary of Work-Related Injuries and Illnesses for 2016 or equivalent on or before December 31, 2017. The establishment employed twenty five (25) employees and was classified under NAICS 323110 during calendar year 2016.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.151 C
- Issued
- May 9, 2018
- Abate by
- Jun 26, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: A. On or about April 12, 2018, Warehouse: Eyewash facilities were not suitable as the fluid in the Fend-All self-contained eyewash station had not been changed in 10 years.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 B02
- Issued
- May 9, 2018
- Abate by
- Jun 26, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: A. Production Area: 1. The Pitney Bowes envelope sealer equipment was powered through a wall-mount listed 4-receptacle outlet box with perforated knockouts, provided as a pendant power source. 2. The Konica Minolta Auto Scan Spectrophotometer FD-9 equipment was powered through a wall-mount listed 2-receptacle outlet box with perforated knockouts, provided as a pendant power source.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 G08
- Issued
- May 9, 2018
- Abate by
- Aug 8, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical: A. On or about April 12, 2018, Facility-Wide: The employer did not ensure that updated safety data sheets for each hazardous chemical used on site were available. The company had a binder of outdated material safety data sheets for chemicals used on site, which included 2-butoxy ethanol; mineral oil, lithium soap and zinc; and dimethylethanolamine. Exposure to these chemicals could cause eye, skin, respiratory tract irritation, skin burns and eye damage.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at ELM Press, INC.
View ELM Press, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 323110)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343014155.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.