DALLAS, TX —
OSHA Inspection: BORAL CONCRETE PRODUCTS, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of BORAL CONCRETE PRODUCTS, LLC in 2202 CHALK HILL RD., DALLAS, TX 75212 (NAICS 327331). OSHA activity number 343022323.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BORAL CONCRETE PRODUCTS, LLC
- Site address
- 2202 CHALK HILL RD.
- City
- DALLAS
- State
- TX
- ZIP
- 75212
- Mailing
- 2202 CHALK HILL RD., DALLAS, TX 75212
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327331
- Employees
- 29
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.146 C01
- Issued
- Jun 20, 2018
- Abate by
- Aug 27, 2018
- Penalty
- Initial $9,959 · Current $6,900 Reduced
General-duty citation text
29 CFR 1910.146(c)(1): The employer did not evaluate the workplace to determine if any spaces were permit-required confined spaces: a) This violation was discovered on March 19, 2018, where at least one (1) employee cleaned inside a large mixer daily, exposed to respiratory and physical hazards.
Recent events (2)
- — I (S) $6900
- — Z (S) $9959
1910.147 C04 I
- Issued
- Jun 20, 2018
- Abate by
- Aug 27, 2018
- Penalty
- Initial $9,959 · Current $6,900 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) This violation was discovered on March 19, 2018, where authorized employees who performed service and maintenance work on block machine. b) This violation was discovered on March 19, 2018, where authorized employees who performed service and maintenance work on cube machine. c) This violation was discovered on March 19, 2018, where authorized employees who performed service and maintenance work on shrink wrap machine.
Recent events (2)
- — I (O) $6900
- — Z (S) $9959
1910.184 E01
- Issued
- Jun 20, 2018
- Abate by
- Jul 17, 2018
- Penalty
- Initial $9,959 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.184(e)(1): Alloy steel sling(s) did not have permanently affixed durable identification stating size, grade, rated capacity, and reach: a. This violation was discovered on March 19, 2018; where the employer did not ensure that four (4) alloy steel chain slings attached to 2-ton overhead crane in production department had permanently affixed tags stating size, grade, rated capacity, and reach.
Recent events (2)
- — I (O) $4000
- — Z (S) $9959
1910.212 A01
- Issued
- Jun 20, 2018
- Abate by
- Jul 17, 2018
- Penalty
- Initial $8,536 · Current $5,900 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) This violation was discovered on March 19, 2018; where at least one (1) employee was not protected from coming in contact with point of operation while working on the Besser block machine (m/n and s/n not legible). b) This violation was discovered on March 19, 2018; where at least one (1) employee was not protected from coming in contact with point of operation while working on the cube machine (m/n and s/n not legible). c) This violation was discovered on March 19, 2018; where at least one (1) employee was not protected from coming in contact with point of operation while working on shrink wrap machine (m/n and s/n not legible).
Recent events (2)
- — I (S) $5900
- — Z (S) $8536
1910.332 B01
- Issued
- Jun 20, 2018
- Abate by
- Jul 17, 2018
- Penalty
- Initial $7,114 · Current $0 Reduced
General-duty citation text
29 CFR 1910.332(b)(1): Employees were not trained in and familiar with the safety-related work practices required by 1910.331 through 1910.335 that pertain to their respective job assignments: a) This violation discovered on March 19, 2018, when at least one (1) employee, who was not trained in and familiar with the safety-related work practices, while changing fuses in 480V panel boxes.
Recent events (2)
- — I (S) $0
- — Z (S) $7114
More inspections at Boral Concrete Products, LLC
View Boral Concrete Products, LLC's full OSHA safety record →
More inspections in this industry (NAICS 327331)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343022323.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.