MENOMONEE FALLS, WI —
OSHA Inspection: MTI INTERNATIONAL, INC.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of MTI INTERNATIONAL, INC. in W133 N5139 CAMPBELL DR, MENOMONEE FALLS, WI 53051 (NAICS 334419). OSHA activity number 343022695.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MTI INTERNATIONAL, INC.
- Site address
- W133 N5139 CAMPBELL DR
- City
- MENOMONEE FALLS
- State
- WI
- ZIP
- 53051
- Mailing
- W133 N5139 CAMPBELL DR, MENOMONEE FALLS, WI 53051
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 334419
- Employees
- 96
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.1025 H02 II
- Issued
- Aug 23, 2018
- Abate by
- Sep 12, 2018
- Penalty
- Initial $4,398 · Current $2,500 Reduced
1591BWPB
General-duty citation text
29 CFR 1910.1025(h)(2)(ii): Shoveling, sweeping or brushing methods were used to remove lead accumulations where vacuuming or other equally effective methods were available and feasible: (a) Employees in the SMT area and the Wave Solder area used push brooms during and at the end of the shift to sweep and clean the floor. Waste material swept up from the floor contained lead material from the manufacturing process.
Recent events (2)
- — I (S) $2500
- — Z (S) $4398
1910.1025 H03
- Issued
- Aug 23, 2018
- Abate by
- Sep 12, 2018
- Penalty
- Initial $0 · Current $0
1591BWPB
General-duty citation text
29 CFR 1910.1025(h)(3): Vacuums were not used and/or emptied in a manner which minimized the reentry of lead into the workplace: (a) Employees in the Wave Solder area used vacuum(s) that did not have HEPA filtration to minimize the re-entry of air contaminated with lead dust back into the facility.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1025 D02
- Issued
- Aug 23, 2018
- Abate by
- Sep 12, 2018
- Penalty
- Initial $4,398 · Current $0 Reduced
1591BWPB
General-duty citation text
29 CFR 1910.1025(d)(2): An initial determination was not made to determine if any employee may be exposed to lead at or above the action level: (a) Employees performing work in the SMT area and Wave solder area use lead pastes and molten lead solder in the manufacturing of circuit boards. An initial determination was not made to determine if any employee(s) may be exposed to lead at or above the action level.
Recent events (2)
- — I (S) $0
- — Z (S) $4398
1910.1025 L01 I
- Issued
- Aug 23, 2018
- Abate by
- Sep 12, 2018
- Penalty
- Initial $4,398 · Current $2,500 Reduced
1591BWPB
General-duty citation text
29 CFR 1910.1025(l)(1)(i): Employee(s) working in an area where there is potential exposure to airborne lead at any level were not informed of the content of Appendices A and B of 29 CFR 1910.1025: (a) Employee(s) working in the SMT area and Wave Solder area were not informed of the content of Appendices A and B of 29 CFR 1910.1025.
Recent events (2)
- — I (S) $2500
- — Z (S) $4398
1910.1025 L02 I
- Issued
- Aug 23, 2018
- Abate by
- Sep 12, 2018
- Penalty
- Initial $0 · Current $0
1591BWPB
General-duty citation text
29 CFR 1910.1025(l)(2)(i): A copy of 29 CFR 1910.1025 and its appendices was not made readily available to all employees who had a potential exposure to airborne lead at any level: (a) A copy of 29 CFR 1910.1025 and its appendices was not made readily available to all employees who had a potential exposure to airborne lead at any level. Employees use lead paste and solder in the SMT area and Wave Solder area.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1025 M01 III
- Issued
- Aug 23, 2018
- Abate by
- Sep 12, 2018
- Penalty
- Initial $0 · Current $0
1591BWPB
General-duty citation text
29 CFR 1910.1025(m)(1)(iii): The employer did not include lead in the hazard communication program established to comply with the HCS (� 1910.1200), and the employer did not ensure that each employee had access to labels on containers of lead and to safety data sheets, and that employees were trained on lead in accordance with the requirements of HCS and paragraph (l) of this section. (a) The employer did not include lead in the written hazard communication program established to comply with the HCS (� 1910.1200). Employees use lead paste and solder in the SMT area and Wave Solder area.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at MTI International, INC.
View MTI International, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 334419)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343022695.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.