Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: QUALITY READY MIX

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of QUALITY READY MIX in HWY 191, INDUSTRIAL PARK, CHINLE, AZ 86503 (NAICS 327320). OSHA activity number 343024071.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Quality Ready MIX — free Get an email when a new federal OSHA severe-injury report for Quality Ready MIX is published. One employer, no account, unsubscribe in one click.
Establishment
QUALITY READY MIX
Site address
HWY 191, INDUSTRIAL PARK
City
CHINLE
State
AZ
ZIP
86503
Mailing
1250 N. PENROD RD., SHOW LOW, AZ 85901
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
327320
Employees
3
Ownership type
A

6 citations on file for this inspection.

1910.305 G01 IV A

Serious Gravity 1 4 instances 3 exposed
Issued
Apr 30, 2018
Abate by
May 23, 2018
Penalty
Initial $3,298 · Current $3,298
29 CFR 1910.305(g)(1)(iv)(A):   Flexible cords and cables were used for purposes prohibited by subparagraphs (a) through (f) of this paragraph in the following location, flexible cord was used in lieu of permanent wiring:      Batch Plant, throughout:  Orange extension cords were piggy-backed throughout the plant to energize fixed equipment such as a diesel pump, heaters, and lighting.  Fire hazard.
Recent events (1)
  • — Z (S) $3298

1910.305 G01 IV B

Serious Gravity 1 3 instances 3 exposed
Issued
Apr 30, 2018
Abate by
May 23, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(1)(iv)(B): Flexible cords and cables were run through holes in walls, ceilings, or floors:   Batch Plant, Trailer:  A series of orange extension cords were run through a hole in the external wall of a trailer to energize a diesel pump, lighting and a heater throughout the plant.  Fire hazard.
Recent events (1)
  • — Z (S) $0

1910.1200 E01

Serious Gravity 1 1 instance 3 exposed
Issued
Apr 30, 2018
Abate by
May 23, 2018
Penalty
Initial $3,298 · Current $3,298
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:                       A written hazard communication program was not developed for employees that used hazardous chemicals such as Portland cement and various admixtures to make concrete.  Employees were exposed to chemical hazards.
Recent events (1)
  • — Z (S) $3298

1910.1200 G01

Serious Gravity 1 1 instance 3 exposed
Issued
Apr 30, 2018
Abate by
May 23, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use:   Safety data sheets (SDS's) were not available for hazardous chemical products such as  admixtures and fly ash used to make concrete.  Employees were exposed to chemical hazards.
Recent events (1)
  • — Z (S) $0

1910.1200 H03 IV

Serious Gravity 1 1 instance 3 exposed
Issued
Apr 30, 2018
Abate by
May 23, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(3)(iv): The details of the hazard communication program developed by the employer did not include an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information:                 Batch Plant:  Employees were not trained on the new label elements (e.g., pictograms and signal words) and the new SDS format, as required by the revised Hazard Communication Standard.  Employees used hazardous chemicals such concrete admixtures, Silica, and Portland cement.  Employees were exposed to chemical hazards.
Recent events (1)
  • — Z (S) $0

1910.303 G01

Other-than-serious 1 instance 1 exposed
Issued
Apr 30, 2018
Abate by
May 4, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment:   Batch Plant, trailer:  An electrical panel box was blocked by various materials.  A three foot clearance was not maintained.
Recent events (1)
  • — Z (O) $0

View Quality Ready MIX's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343024071.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.