EASTON, PA —
OSHA Inspection: GLENN GRACEY PLASTERING, INC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of GLENN GRACEY PLASTERING, INC in WAWA 631 S. 25TH ST., EASTON, PA 18045 (NAICS 238140). OSHA activity number 343026969.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GLENN GRACEY PLASTERING, INC
- Site address
- WAWA 631 S. 25TH ST.
- City
- EASTON
- State
- PA
- ZIP
- 18045
- Mailing
- PO BOX 369, BUCKINGHAM, PA 18912
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 4
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.1200 E01
- Issued
- Apr 4, 2018
- Abate by
- Apr 19, 2018
- Penalty
- Initial $1,413 · Current $989 Reduced
9000
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (Construction Reference: 1926.59) a) 631 S 25th St, Easton, PA: Employees were mixing mortar and cutting Quality Stone veneers exposing them to silica and the employer did not have a written hazard communication program, on or about March 20, 2018. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $989.1
- — Z (S) $1413
1910.1200 G08
- Issued
- Apr 4, 2018
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical: a) 631 S 25th St, Easton, PA: Employees were cutting Quality Stone veneers exposing them to silica and the employer did not have a safety data sheet for the Quality Stone veneer, on or about March 20, 2018. No abatement certification or documentation required.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H01
- Issued
- Apr 4, 2018
- Abate by
- Apr 24, 2018
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (Construction Reference: 1926.59) a) 631 S 25th St, Easton, PA: Employees were mixing mortar and cutting Quality Stone veneers exposing the employees to silica and the employer did not provide employees with information about the hazards of the chemicals they were exposed to or how to protect them, on or about March 20, 2018. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1153 I01
- Issued
- Apr 4, 2018
- Abate by
- Apr 24, 2018
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1926.1153(i)(1): The employer did not ensure that each employee is trained in accordance with the provisions of the Hazard Communication Standard and paragraph (i)(2) of this section: a) 631 S 25th St, Easton, PA: Employees were mixing mortar and cutting Quality Stone veneers exposing the employees to silica and the employer did not ensure employees could demonstrate knowledge and understanding on the information about silica as required by this standard, on or about March 20, 2018. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1153 G01
- Issued
- Apr 4, 2018
- Abate by
- Apr 19, 2018
- Penalty
- Initial $1,413 · Current $989 Reduced
9000
General-duty citation text
29 CFR 1926.1153(g)(1): The employer did not establish and implement a written exposure control plan: a) 631 S. 25th St, Easton, PA: Employees were using Makita handheld angle grinders to cut Quality Stone veneers and the employer did not have a written exposure control plan containing the information as required by the standard, on or about March 20, 2018. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $989.1
- — Z (S) $1413
More inspections in this industry (NAICS 238140)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343026969.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.