JERMYN, PA —
OSHA Inspection: J & E INDUSTRIES INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of J & E INDUSTRIES INC. in 201 SOUTH WASHINGTON AVE., JERMYN, PA 18433 (NAICS 332710). OSHA activity number 343029005.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J & E INDUSTRIES INC.
- Site address
- 201 SOUTH WASHINGTON AVE.
- City
- JERMYN
- State
- PA
- ZIP
- 18433
- Mailing
- 201 SOUTH WASHINGTON AVE., JERMYN, PA 18433
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 22
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Apr 5, 2018
- Abate by
- May 22, 2018
- Penalty
- Initial $3,141 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Production area: Machine specific energy control procedures were not developed and documented for equipment including, but not limited to, CNC operated milling and boring machines, on or about March 20, 2018. Abatement Certification Required.
Recent events (2)
- — I (O) $0
- — Z (S) $3141
1910.147 C06 II
- Issued
- Apr 5, 2018
- Abate by
- May 22, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed: a) Production area: The employer did not certify that periodic inspections of the energy control procedures had been performed, on or about March 20, 2018. Abatement Certification Required.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.147 C07 IV
- Issued
- Apr 5, 2018
- Abate by
- May 22, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date: a) Production area: The employer did not certify that employee training had been accomplished and kept up to date, on or about March 20, 2018. Abatement Certification Required.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.212 A01
- Issued
- Apr 5, 2018
- Abate by
- May 22, 2018
- Penalty
- Initial $3,141 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Production area: There were no chuck guards for the two manual lathes (LeBlond and Hardinge) used primarily by maintenance, as observed on or about March 20, 2018. Abatement Certification Required.
Recent events (2)
- — I (S) $2500
- — Z (S) $3141
1910.242 B
- Issued
- Apr 5, 2018
- Abate by
- May 22, 2018
- Penalty
- Initial $3,141 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) Production area: Compressed air wands (4) used for cleaning purposes were not reduced to less than 30 PSI in that the safety tips had been damaged and air pressure was measured at 80-100 PSI, as observed on or about March 20, 2018. Abatement Certification Required.
Recent events (2)
- — I (S) $2500
- — Z (S) $3141
More inspections at J & E Industries INC.
View J & E Industries INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343029005.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.