HAMPDEN, ME —
OSHA Inspection: MAINE TRAILER, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MAINE TRAILER, INC. in 101 COLDBROOK ROAD, HAMPDEN, ME 04444 (NAICS 532120). OSHA activity number 343030284.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MAINE TRAILER, INC.
- Site address
- 101 COLDBROOK ROAD
- City
- HAMPDEN
- State
- ME
- ZIP
- 04444
- Mailing
- P.O. BOX 220, HAMPDEN, ME 04444
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 532120
- Employees
- 20
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.110 E04 III
- Issued
- Apr 3, 2018
- Abate by
- Apr 11, 2018
- Penalty
- Initial $3,696 · Current $1,848 Reduced
General-duty citation text
29 CFR 1910.110(e)(4)(iii): Permanent and removable fuel containers were not securely mounted to prevent jarring loose, slipping, or rotating: LP fuel tanks were not secured to a forklift securely, in the following instances: a) Warehouse - The locating pin for the LP fuel tank on the Nissan Optimum 50 forklift was missing. b) Workshop - The locating pin for the LP fuel tank on the Nissan 60 forklift was not inserted in the locating hole on the tank.
Recent events (2)
- — I (S) $1848
- — Z (S) $3696
1910.178 M05 I
- Issued
- Apr 3, 2018
- Abate by
- Apr 11, 2018
- Penalty
- Initial $2,217 · Current $1,109 Reduced
General-duty citation text
29 CFR 1910.178(m)(5)(i): When a powered industrial truck is left unattended, load engaging means were not fully lowered, controls were not neutralized, power was not shut off, and brakes set: The load engaging means were not fully lowered in the following instances: a) Warehouse - A Nissan Optimum 50 forklift was left unattended with its load engaging means not fully lowered. b) Workshop - A Nissan 60 forklift was left unattended with the load engaging means not fully lowered.
Recent events (2)
- — I (S) $1108.5
- — Z (S) $2217
1910.157 C04
- Issued
- Apr 3, 2018
- Penalty
- Initial $3,696 · Current $1,848 Reduced
General-duty citation text
29 CFR 1910.157(c)(4): Portable fire extinguishers were not maintained in a fully charged and operable condition: Workshop - A Badger 10 pound ABC fire extinguisher, located between the main bay doors, was partially discharged.
Recent events (2)
- — I (S) $1848
- — Z (S) $3696
1910.157 E02
- Issued
- Apr 3, 2018
- Abate by
- Apr 11, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly: Facility - Twenty fire extinguishers had not been subjected to a monthly inspection since they were changed out by the supplier in May of 2017.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.176 B
- Issued
- Apr 3, 2018
- Abate by
- Apr 20, 2018
- Penalty
- Initial $2,956 · Current $1,478 Reduced
General-duty citation text
29 CFR 1910.176(b): Storage of material created a hazard. Warehouse - Two storage racks had damaged vertical stanchions.
Recent events (2)
- — I (S) $1478
- — Z (S) $2956
1910.215 A04
- Issued
- Apr 3, 2018
- Abate by
- Apr 11, 2018
- Penalty
- Initial $3,696 · Current $1,848 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: Workshop - The work rest on the DeWalt, DW-58 bench grinder was set at approximately 5/8 of an inch from the grinding wheel.
Recent events (2)
- — I (S) $1848
- — Z (S) $3696
1910.215 B09
- Issued
- Apr 3, 2018
- Abate by
- Apr 11, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: Workshop - The tongue guard on the DeWalt DE-58 bench grinder was adjusted to approximately 7/8 of an inch from the grinding wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1904.29 B01
- Issued
- Apr 3, 2018
- Abate by
- Apr 11, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.29(b)(1): The employer did not provide the required injury or illness descriptions on the Log of Work-Related Injuries and Illnesses, OSHA Form 300: Facility - Column F on the 2017 Log of Work Related Injuries and Illnesses, OSHA Form 300, did not specifically address the objects or substances that directly injured or made the employee ill.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1904.32 A02
- Issued
- Apr 3, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.32(a)(2): Annual summary of injuries and illnesses was not created from the information contained on the OSHA 300 Log: Facility - The employer did not create an annual summary (OSHA 300A) of injuries and illnesses from the OSHA 300 Log.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Maine Trailer, INC.
View Maine Trailer, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 532120)
More inspections in ME
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343030284.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.