OSHA Inspection: INTERNATIONAL HARDWARE LIQUIDATORS, LLC

Issued

Dec 26, 2018

Abate by

Feb 13, 2019

Penalty

Initial $311 · Current $311

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  On or about December 19, 2018, the employer failed to submit certification of corrective action for citation 2, item 1 issued on 09/14/2018 with an abatement due date of 10/11/2018.  On or about December 19, 2018, the employer failed to submit certification of corrective action for citation 2, item 3 issued on 09/14/2018 with an abatement due date of 09/26/2018.  On or about December 19, 2018, the employer failed to submit certification of corrective action for citation 2, item 4 issued  on 09/14/2018 with an abatement due date of 10/11/2018.  On or about December 19, 2018, the employer failed to submit certification of corrective action for citation 2, item 5 issued on 09/14/2018 with an abatement due date of 11/01/2018.

Issued

Sep 14, 2018

Abate by

Oct 11, 2018

Penalty

Initial $2,772 · Current $2,772

General-duty citation text

29 CFR 1910.213(d)(1): Each circular crosscut table saw shall be guarded by a hood which shall meet all the requirements of paragraph (c)(1) of this section for hoods for circular ripsaws:  On or about August 30, 2018, at the rear of aisle in the fabrication warehouse, employees used a table saw without a guard during door fabrication process.

Issued

Sep 14, 2018

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge:   On or about March 20, 2018, in the warehouse, front warehouse exit door is locked and blocked with objects in the work area where employees are fabricating wood doors.

Issued

Sep 14, 2018

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:  On or about March 20, 2018, in rear warehouse, the exit route was not kept free and clear to allow employees to freely exit.

Issued

Sep 14, 2018

Abate by

Sep 26, 2018

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible:  On or about March 20, 2018, in the welding shop, the employer did not provide information contained in Appendix D for employees  who wear filtering facepiece respirators when  engaged in door fabrication operations.

Issued

Sep 14, 2018

Abate by

Oct 11, 2018

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years:  On or about March 20, 2018, the employer did not conduct evaluation on employees who operate forklifts daily every three years.

Issued

Sep 14, 2018

Abate by

Nov 1, 2018

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  On or about March 20, 2018, at the above addressed jobsite, the employer did not develop a written hazard communication program for employees who use hazardous products such as, but no limited to, propane fuel, hydrocarbon, and quartz to fabricate doors.