EDINBURG, TX —
OSHA Inspection: CORNERSTONE TIRE, L.L.C.
Federal Agency inspection · Health discipline
At a glance
On , OSHA opened a federal Agency health inspection of CORNERSTONE TIRE, L.L.C. in 5107 SOUTH JACKSON RD, EDINBURG, TX 78539 (NAICS 811198). OSHA activity number 343031274.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CORNERSTONE TIRE, L.L.C.
- Site address
- 5107 SOUTH JACKSON RD
- City
- EDINBURG
- State
- TX
- ZIP
- 78539
- Mailing
- 5107 SOUTH JACKSON RD, EDINBURG, TX 78539
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811198
- Employees
- 7
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.177 C01
- Issued
- Jun 22, 2018
- Abate by
- Jul 12, 2018
- Penalty
- Initial $12,934 · Current $6,475 Reduced
General-duty citation text
29 CFR 1910.177(c)(1): The employer did not provide a program to train all employees who service rim wheels in the hazards involved and the safety procedures to follow while servicing rim wheels: At this automotive repair and maintenance shop, the employer did not implemented a training program, in accordance with 1910.177(c)(1)(i-iii), for employees servicing wheels used on large vehicles, such as tractors.
Recent events (2)
- — I (S) $6475
- — Z (S) $12934
1910.177 D01
- Issued
- Jun 22, 2018
- Abate by
- Jul 12, 2018
- Penalty
- Initial $12,934 · Current $0 Reduced
General-duty citation text
29 CFR 1910.177(d)(1): The employer did not furnish a restraining device for employees to use while inflating tires on multi-piece wheels: At this automotive repair and maintenance shop, the employer did not provide restraining devices for employees who were involved on mounting and dismounting rims, inflating tires on multi-piece piece rim wheels used on large vehicles, such as tractors.
Recent events (2)
- — I (S) $0
- — Z (S) $12934
1910.177 D02
- Issued
- Jun 22, 2018
- Abate by
- Jul 12, 2018
- Penalty
- Initial $0 · Current $6,475
General-duty citation text
29 CFR 1910.177(d)(2): The employer did not provide a restraining device or a barrier to be used when inflating tires on single piece rim wheels which are not bolted onto the vehicles: At this automotive repair and maintenance shop, the employer did not provide restraining devices for employees who were involved on mounting and dismounting rims, inflating tires on single piece rim wheels used on large vehicles, such as tractors.
Recent events (2)
- — I (S) $6475
- — Z (S) $0
1910.177 D04 II
- Issued
- Jun 22, 2018
- Abate by
- Jul 12, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.177(d)(4)(ii): The employer did not furnish an air line assembly which included an in-line valve with a pressure gauge or a presettable regulator for inflating tires on rim wheels: At this automotive repair and maintenance shop, the employer did not provided an air line assembly which included an in-line valve with a pressure gauge or a presettable regulator for inflating tires on rim wheels used on large vehicles, such as tractors.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.177 D05
- Issued
- Jun 22, 2018
- Abate by
- Jul 12, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.177(d)(5): Current charts (rim manuals) containing instructions for the type of wheels being serviced were not available in the service area: At this automotive repair and maintenance shop, the employer did not provided rim manuals or charts for employees exposed to hazards associated with servicing different rim wheels used on large vehicles such as tractor.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.177 F
- Issued
- Jun 22, 2018
- Abate by
- Jul 12, 2018
- Penalty
- Initial $12,934 · Current $0 Reduced
General-duty citation text
29 CFR 1910.177(f): The employer did not establish a safe operating procedure for servicing multi-piece rim wheels which contained, at a minimum, the elements listed in 29 CFR 1910.177(f)(1) through (11): At this automotive repair and maintenance shop, the employer did not establish a safe operating procedure for employees involved in servicing multi-piece piece rim wheels used on large vehicles, such as tractors.
Recent events (2)
- — I (S) $0
- — Z (S) $12934
1910.177 G
- Issued
- Jun 22, 2018
- Abate by
- Jul 12, 2018
- Penalty
- Initial $0 · Current $6,475
General-duty citation text
29 CFR 1910.177(g): The employer did not establish a safe operating procedure for servicing single piece rim wheels which contained, at a minimum, the elements listed in 29 CFR 1910.177(g)(1) through (12): At this automotive repair and maintenance shop, the employer did not establish a safe operating procedure for employees involved in servicing single piece rim wheels used on large vehicles, such as tractors.
Recent events (2)
- — I (S) $6475
- — Z (S) $0
1910.1025 H01
- Issued
- Jun 22, 2018
- Abate by
- Jul 19, 2018
- Penalty
- Initial $2,217 · Current $575 Reduced
1591BWPB
General-duty citation text
29 CFR 1910.1025(h)(1): All surfaces were not maintained as free as practicable of accumulations of lead: At this automotive repair and maintenance shop, employees were involved in automotive and large vehicles tires replacement, and other automotive repair/maintenance. The work surfaces were not regularly cleaned to prevent avoidable lead exposure, such as those potentially caused by re-entrained lead dust.
Recent events (2)
- — I (S) $575
- — Z (S) $2217
1910.1200 E01
- Issued
- Jun 22, 2018
- Abate by
- Jul 19, 2018
- Penalty
- Initial $0 · Current $0
00400117043510801810
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: At this automotive repair and maintenance shop, employees performed automotive and large vehicles tires replacement and other automotive repair/maintenance and used hazardous chemicals. The employer did not develop a written hazard communication program in accordance with 1910.1200(f), (g), and (h).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 811198)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343031274.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.