OWENSVILLE, MO —
OSHA Inspection: THE TOOLROOM, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of THE TOOLROOM, INC. in 1009 COMMERCIAL DRIVE, OWENSVILLE, MO 65066 (NAICS 333514). OSHA activity number 343047882.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THE TOOLROOM, INC.
- Site address
- 1009 COMMERCIAL DRIVE
- City
- OWENSVILLE
- State
- MO
- ZIP
- 65066
- Mailing
- 1009 COMMERCIAL DRIVE PO BOX 529, OWENSVILLE, MO 65066
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333514
- Employees
- 36
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C04 I
- Issued
- Apr 26, 2018
- Abate by
- May 22, 2018
- Penalty
- Initial $4,398 · Current $2,199 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: JOB Site: 1009 Commercial Drive, Owensville, MO 65066, on or about 3/28/2018, the employer failed to develop, document and utilized written LOTO procedures for but not limited to CNC OKUMA Lathe, 5 AXIS-HAAS Vertical Milling, Plastar-T90H Plastic Molding machine. The workers were exposed to a potential electrical hazard.
Recent events (2)
- — I (S) $2199
- — Z (S) $4398
1910.151 C
- Issued
- Apr 26, 2018
- Abate by
- May 22, 2018
- Penalty
- Initial $3,298 · Current $1,649 Reduced
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: JOB SITE: 1009 Commercial Drive, Owensville, MO 65066, on or about 3/29/2018, the employer failed to provide suitable facilities for quick drenching or flushing of the eyes within the work area for immediate emergency use.
Recent events (2)
- — I (S) $1649
- — Z (S) $3298
1910.212 A03 II
- Issued
- Apr 26, 2018
- Abate by
- May 22, 2018
- Penalty
- Initial $5,497 · Current $2,749 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): JOB SITE: 1009 Commercial Drive, Owensville, MO 65066 on or about 3/29/2018, the employer failed to protect employees from a point of operation hazard on the Bridgeport Milling Machines. Employees were exposed to hand and fingers amputation hazards with direct contact to an unguarded chuck of the machine. The workers were exposed to a amputation hazard. Bridgeport Milling Machines: 1) Model: XA-900-00, S/N: 1230 2) Model: XA-900-00, S/N: 1380 3) Model: XA-900-01, S/N: 13__ 4) Model: F7347, S/N: 1-18-017
Recent events (2)
- — I (S) $2749
- — Z (S) $5497
More inspections at The Toolroom, INC.
View The Toolroom, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333514)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343047882.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.