Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PANTHER CITY IRON WORKS, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of PANTHER CITY IRON WORKS, INC. in 6941 RIVERSIDE DR., IRVING, TX 75039 (NAICS 238120). OSHA activity number 343056164.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Panther City Iron Works, INC. — free Get an email when a new federal OSHA severe-injury report for Panther City Iron Works, INC. is published. One employer, no account, unsubscribe in one click.
Site address
6941 RIVERSIDE DR.
City
IRVING
State
TX
ZIP
75039
Mailing
7200 CR 422, GRANDVIEW, TX 76050
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238120
Employees
4
Ownership type
A

4 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 7, 2018
Abate by
Aug 17, 2018
Penalty
Initial $2,217 · Current $1,330 Reduced
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:  This violation occurred on or about March 30, 2018, at a workplace located at 6941 Riverside Dr., Irving, TX; where at least one (1) employee, who was performing welding operation, was not wearing face protection/face shield.
Recent events (2)
  • — I (S) $1330.2
  • — Z (S) $2217

1926.303 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 7, 2018
Abate by
Aug 17, 2018
Penalty
Initial $2,772 · Current $1,663 Reduced
29 CFR 1926.303(b)(1): Grinding machines were not equipped with safety guards in conformance with the requirements of ANSI B7.1-1970, Safety Code for the Use, Care, and Protection of abrasive wheels, and paragraph (d) of this section.  This violation occurred on or about March 30, 2018, at a workplace located at 6941 Riverside Dr., Irving, TX; where at least one (1) employee, who was using grinder that was missing guard.
Recent events (2)
  • — I (S) $1663.2
  • — Z (S) $2772

1926.352 D

Serious Gravity 5 1 instance 4 exposed
Issued
Aug 7, 2018
Abate by
Aug 17, 2018
Penalty
Initial $2,772 · Current $1,663 Reduced
29 CFR 1926.352(d): Suitable fire extinguishing equipment was not immediately available in the work area(s) where welding, cutting, or heating was being performed:  This violation occurred on or about March 20, 2018, at a workplace located at 6941 Riverside Dr., Irving, TX; where at suitable fire extinguishing equipment was not immediately available in the work area(s) where welding was being performed.
Recent events (2)
  • — I (S) $1663.2
  • — Z (S) $2772

1926.760 A01

Serious Gravity 10 1 instance 1 exposed
Issued
Aug 7, 2018
Abate by
Aug 17, 2018
Penalty
Initial $3,880 · Current $2,328 Reduced
29 CFR 1926.760(a)(1): Each employee engaged in a steel erection activity who is on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems, or fall restraint systems.  This violation occurred on or about March 30, 2018, at a workplace located at 6941 Riverside Dr., Irving, TX; where at least one (1) employee, who was working from the top of steel decking floor, closed to the edge and was not protected from falling to the ground below.
Recent events (2)
  • — I (S) $2328
  • — Z (S) $3880

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343056164.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.