Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MIDWAY TOWER SERVICES, INC.

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of MIDWAY TOWER SERVICES, INC. in 20823 HIGHWAY 27 S, UTICA, MS 39175 (NAICS 237130). OSHA activity number 343061354.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Midway Tower Services, INC. — free Get an email when a new federal OSHA severe-injury report for Midway Tower Services, INC. is published. One employer, no account, unsubscribe in one click.
Site address
20823 HIGHWAY 27 S
City
UTICA
State
MS
ZIP
39175
Mailing
421 SECOND AVENUE, SARALAND, AL 36571
Inspection type
Federal Agency (M)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
237130
Employees
5
Ownership type
A

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 10 1 instance 5 exposed
Issued
Sep 10, 2018
Abate by
Sep 12, 2018
Penalty
Initial $12,934 · Current $1,500 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees    (a) Bear Creek Tower - On or about April 2, 2018, the employer was in the process of securing a waveguide ladder to the face of a communication tower and did not ensure an adequate number of friction clamps were installed before releasing the waveguide ladder from the crane, exposing employees to fall and struck-by hazards.
Recent events (3)
  • — F (S) $1500
  • — C (S) $12934
  • — Z (S) $12934

1926.251 A01

Serious Gravity 5 2 instances 5 exposed
Issued
Sep 10, 2018
Abate by
Oct 2, 2018
Penalty
Initial $3,326 · Current $250 Reduced
29 CFR 1926.251(a)(1): Rigging equipment for material handling shall be inspected prior to use on each shift and as necessary during its use to ensure that it is safe. Defective rigging equipment shall be removed from service.    (a)        Bear Creek Tower - On or about March 28, 2018 employees were exposed to a struck-by hazard while lifting components to erect a telecommunications tower during a construction project due to damaged slings.  These slings contained rips, tears, and illegible tags with no weigh capacity on them. Also the user did not follow the manufacturers warning for replacement.      (b)        Bear Creek Tower - On or about April 2, 2018 employees were exposed to a struck-by hazard while lifting components to erect a telecommunications tower during a construction project due to damaged slings.  These slings contained rips and tears. Also the user did not follow the manufacturers warning for replacement.
Recent events (3)
  • — F (S) $250
  • — C (S) $3326
  • — Z (S) $3326

1926.251 A02 III

Serious Gravity 5 2 instances 5 exposed
Issued
Sep 10, 2018
Abate by
Oct 2, 2018
Penalty
Initial $0 · Current $0
29 CFR 1926.251(a)(2)(iii): Not be used without affixed, legible identification markings, required by paragraph (a)(2)(i) of this section.   (a)    Bear Creek Tower - On or about March 28, 2018 employees were exposed to a struck-by hazard while lifting components to erect a telecommunications tower due to damaged slings.  These slings contained rips, tears, and illegible tags with no weigh capacity on them. Also the user did not follow the manufacturers warning for replacement.
Recent events (3)
  • — F (S) $0
  • — C (S) $0
  • — Z (S) $0

1926.701 B

Serious Gravity 5 1 instance 3 exposed
Issued
Sep 10, 2018
Abate by
Sep 12, 2018
Penalty
Initial $2,217 · Current $250 Reduced
29 CFR 1926.701(b): Reinforcing steel. All protruding reinforcing steel, onto and into which employees could fall, shall be guarded to eliminate the hazard of impalement.    (a)  Bear Creek Tower - On or about March 27, 2018 employees were exposed to uncapped rebar while assembling and rigging a radar antenna.
Recent events (3)
  • — F (S) $250
  • — C (S) $2217
  • — Z (S) $2217

View Midway Tower Services, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343061354.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.