NORTH AURORA, IL —
OSHA Inspection: ALL REMODELING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ALL REMODELING, INC. in 1000 KILBERRY LANE, NORTH AURORA, IL 60542 (NAICS 238170). OSHA activity number 343068789.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALL REMODELING, INC.
- Site address
- 1000 KILBERRY LANE
- City
- NORTH AURORA
- State
- IL
- ZIP
- 60542
- Mailing
- 3131 CUBA ROAD, LONG GROVE, IL 60047
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 2
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.20 B01
- Issued
- Jul 12, 2018
- Abate by
- Jul 26, 2018
- Penalty
- Initial $2,956 · Current $1,478 Reduced
General-duty citation text
29 CFR 1926.20(b)(1): It shall be the responsibility of the employer to initiate and maintain such programs as may be necessary to comply with this part. a. On or about April 06, 2018 at the above referenced inspection site, the employer did not initiate and maintain an accident prevention program and/or safety and health program to comply with the regulations of this part which included, but were not limited to employee protection when exposed to falls. Abatement documentation is required for this item in accordance with 29 CFR 1903.19(d).
Recent events (2)
- — I (S) $1478
- — Z (S) $2956
1926.20 B02
- Issued
- Jul 12, 2018
- Abate by
- Jul 26, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.20(b)(2): Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers. a. On or about April 06, 2018 at the above referenced inspection site, safety inspections were not made by persons capable of identifying and correcting those hazards which could result in employee injuries. Abatement documentation is required for this item in accordance with 29 CFR 1903.19(d).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.20 B04
- Issued
- Jul 12, 2018
- Abate by
- Jul 26, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.20(b)(4): The employer shall permit only those employees qualified by training or experience to operate equipment and machinery. a. On or about April 06, 2018 at the above referenced inspection site, the employer failed to ensure that employees operating an aerial had been properly trained prior to starting operations. Abatement documentation is required for this item in accordance with 29 CFR 1903.19(d).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.100 A
- Issued
- Jul 12, 2018
- Abate by
- Jul 26, 2018
- Penalty
- Initial $4,434 · Current $2,217 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be protected by protective helmets. a. On or about April 06, 2018, at the above referenced inspection site, employees exposed to injury from falling or flying objects were not wearing head protection. Abatement documentation is required for this item in accordance with 29 CFR 1903.19(c).
Recent events (2)
- — I (S) $2217
- — Z (S) $4434
1926.453 B02 V
- Issued
- Jul 12, 2018
- Abate by
- Jul 26, 2018
- Penalty
- Initial $5,174 · Current $2,605 Reduced
General-duty citation text
29 CFR 1926.453(b)(2)(v): A body belt shall be worn and a lanyard attached to the boom or basket when working from an aerial lift. a. On or about April 06, 2018, at the above referenced inspection site, an employee working in a telescopic boom aerial lift was not properly attached to the boom or basket by the use of a lanyard, thereby exposing the employee to the hazards associated with a fall of more than fifteen (25) feet. Abatement documentation is required for this item in accordance with 29 CFR 1903.19(d).
Recent events (2)
- — I (S) $2605
- — Z (S) $5174
More inspections at ALL Remodeling, INC.
View ALL Remodeling, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238170)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343068789.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.