RICHMOND HILL, GA —
OSHA Inspection: CAESARSTONE TECHNOLOGIES USA INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CAESARSTONE TECHNOLOGIES USA INC. in 1 CAESARSTONE DRIVE SUITE 100, RICHMOND HILL, GA 31324 (NAICS 327991). OSHA activity number 343084182.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CAESARSTONE TECHNOLOGIES USA INC.
- Site address
- 1 CAESARSTONE DRIVE SUITE 100
- City
- RICHMOND HILL
- State
- GA
- ZIP
- 31324
- Mailing
- 1 CAESARSTONE DRIVE SUITE 100, RICHMOND HILL, GA 31324
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- Employees
- 220
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.133 A01
- Issued
- Sep 7, 2018
- Penalty
- Initial $6,220 · Current $0 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: a) Propane Filling Station - On or about April 12, 2018 and times prior to, the employer did not ensure that employees utilized eye and face protection when performing filling operations with liquid propane, thus exposing employees to skin burns and eye injuries.
Recent events (2)
- — I (S) $0
- — Z (S) $6220
1910.147 C02 II
- Issued
- Sep 7, 2018
- Abate by
- Oct 3, 2018
- Penalty
- Initial $12,806 · Current $9,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(2)(ii): An energy isolating device that was capable of being locked out, did not utilize a lockout device, which rendered the machine or equipment inoperative: a) Polish Department - On or about April 9, 2018 and times prior to, the employer did not ensure that employees used effective energy isolating devices for the control of hazardous energy when performing maintenance activities on polish equipment such as but not limited to conveyors, thus exposing employees to caught-in hazards.
Recent events (2)
- — I (S) $9000
- — Z (S) $12806
1910.147 C09
- Issued
- Sep 7, 2018
- Abate by
- Oct 3, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(9): Affected employees were not notified by the employer or authorized employee of the application and removal of lockout devices or tagout devices: a) Polish Department - On or about April 12, 2018 and times prior to, authorized employees did not ensure that affected employees were notified when maintenance procedures requiring lockout/tagout were completed and equipment was ready to be re-energized and restarted, thus exposing employees to caught-in and struck-by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.176 A
- Issued
- Sep 7, 2018
- Penalty
- Initial $12,806 · Current $9,000 Reduced
General-duty citation text
29 CFR 1910.176(a): Use of mechanical equipment. Where mechanical handling equipment was used, permanent aisles and passageways were not appropriately marked: a) Polish Department Production Floor - On or about April 9, 2018 and times prior to, the employer did not ensure that employees walking between Polish Line 6 and Polish Line 7 were protected from forklift traffic traveling down the aisle way between the two polish lines, thus exposing employees to struck-by hazards.
Recent events (2)
- — I (S) $9000
- — Z (S) $12806
1910.178 N04
- Issued
- Sep 7, 2018
- Abate by
- Oct 3, 2018
- Penalty
- Initial $12,806 · Current $9,000 Reduced
General-duty citation text
29 CFR 1910.178(n)(4): Industrial truck driver(s) were not required to travel with the load trailing whenever the load obstructed forward view: a) Polish Department - On or about April 12, 2018 and times prior to, the employer did not ensure that powered industrial truck operators travelled with the load trailing when transporting quartz slabs that obstructed forward view, thus exposing employees to struck-by and crushed-by hazards.
Recent events (2)
- — I (S) $9000
- — Z (S) $12806
More inspections at Caesarstone Technologies USA INC.
View Caesarstone Technologies USA INC.'s full OSHA safety record →
More inspections in this industry (NAICS 327991)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343084182.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.