LAKEVILLE, MA —
OSHA Inspection: COLD STORAGE SOLUTIONS INCORPORATED
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of COLD STORAGE SOLUTIONS INCORPORATED in 220 KENNETH WELCH DRIVE, LAKEVILLE, MA 02347 (NAICS 424420). OSHA activity number 343084505.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COLD STORAGE SOLUTIONS INCORPORATED
- Site address
- 220 KENNETH WELCH DRIVE
- City
- LAKEVILLE
- State
- MA
- ZIP
- 02347
- Mailing
- 310 KENNETH WELCH DRIVE, LAKEVILLE, MA 02347
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424420
- Employees
- 40
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Aug 28, 2018
- Abate by
- Dec 17, 2018
- Penalty
- Initial $9,054 · Current $5,432 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: Worksite The employer did not develop machine specific lockout tagout procedures for each type of equipment in or outside the buildings. A worker was injured while attempting to replace the belt of a condenser.
Recent events (2)
- — I (S) $5432
- — Z (S) $9054
1910.147 C07 I A
- Issued
- Aug 28, 2018
- Abate by
- Dec 17, 2018
- Penalty
- Initial $3,880 · Current $2,328 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation: 220 Welch Drive, Lakeville, Ma., Behind the Building: The employer did not provide lockout tagout training for all maintenance employees who work on refrigeration equipment.
Recent events (2)
- — I (S) $2328
- — Z (S) $3880
1910.147 C07 IV
- Issued
- Aug 28, 2018
- Abate by
- Dec 17, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date: Worksite: The employer did not have a record of training on the lockout tagout program for all employees.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 D03
- Issued
- Aug 28, 2018
- Abate by
- Oct 18, 2018
- Penalty
- Initial $9,054 · Current $5,432 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): 220 Kenneth Welch Drive, Lakeville, Ma. The electrical disconnect box for the condenser belt was in close proximity to the rotating belt and exposed employees to the rotating belt. A worker was injured at a belt and pulley pinchpoint.
Recent events (2)
- — I (S) $5432
- — Z (S) $9054
1910.147 D05 I
- Issued
- Aug 28, 2018
- Abate by
- Oct 18, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(5)(i): All potentially hazardous stored or residual energy was not relieved, disconnected, restrained or otherwise rendered safe after the application of lockout or tagout devices to energy isolating devices: 220 Kenneth Welch Drive, Lakeville, Ma. The employer did not verify that residual energy was relieved from the condenser drive prior to replacing the belt. A worker was injured at the belt and pulley pinchpoint.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Cold Storage Solutions Incorporated
View Cold Storage Solutions Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 424420)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343084505.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.