OSHA Inspection: NEW TAYLER GLASS, DOORS & METAL, INC.

Issued

Jun 12, 2018

Abate by

Jun 26, 2018

Penalty

Initial $1,663 · Current $832 Reduced

General-duty citation text

29 CFR 1926.20(b)(1): The employer did not initiate and maintain such programs as may be necessary to comply with this part.    a. On or about April 12, 2018, at the above addressed jobsite, the employer did not maintain an accident prevention program to comply with the regulations of this part which included, but were not limited to employee protection when exposed to hazards related to commercial construction.

Issued

Jun 12, 2018

Penalty

Initial $2,217 · Current $1,109 Reduced

General-duty citation text

29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.    a.  On or about April 12, 2018, at the above addressed jobsite, an employee using a table saw did not wear safety glasses, thereby exposing the employee to the hazards associated with eye injuries.

Issued

Jun 12, 2018

Penalty

Initial $3,880 · Current $1,941 Reduced

General-duty citation text

29 CFR 1926.453(b)(2)(v): A body belt was not worn and/or a lanyard was not attached to the boom or basket when working from an aerial lift:Note:  As of January 1, 1998, subpart M of this part (1926.502(d)) provides that body belts are not acceptable as part of a personal fall arrest system.  The use of a body belt in a tethering system or in a restraint system is acceptable and is regulated    a.  On or about April 12, 2018, at the above addressed jobsite, employees performing window installation operations from a JLG aerial lifts, approximately twenty-seven (27') feet above the ground, were not wearing personal fall protection, thereby exposing the employees to falls.

Issued

Jun 12, 2018

Abate by

Jun 26, 2018

Penalty

Initial $1,663 · Current $832 Reduced

General-duty citation text

29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards.    a.  On or about April 12, 2018, at the above addressed jobsite, employees conducting framing and window installation operations from a JLG aerial lifts were not provided training on how to minimize fall protection hazards, thereby exposing employees to the hazards associated with falls.