LAKEWOOD, CO —
OSHA Inspection: CANYON FRAMING, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CANYON FRAMING, INC. in 12345 W NEVADA PLACE, LAKEWOOD, CO 80228 (NAICS 238130). OSHA activity number 343097028.
Where did this inspection happen?
- Establishment
- CANYON FRAMING, INC.
- Site address
- 12345 W NEVADA PLACE
- City
- LAKEWOOD
- State
- CO
- ZIP
- 80228
- Mailing
- 205 KEN PRATT BLVD SUITE 120-62, LONGMONT, CO 80501
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 3
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.102 A01
- Issued
- Abate by
- Penalty
- Initial $1663.00 · Current $1663.00
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: (a) On or about April 18, 2018, employees were exposed to eye injuries while using a pneumatic nail gun, and working adjacent to the pneumatic nail gun, without wearing safety glasses. Abatement Note: Abatement certification is required for this item (see enclosed Certification of Corrective Action Worksheet).
Recent events (1)
- — Z (S) $1663
1926.501 B13
- Issued
- Abate by
- Penalty
- Initial $2217.00 · Current $2217.00
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels was not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b): (a) On or about April 18, 2018, employees were exposed to falls of 10 feet while constructing the second level floor of a townhome without any means of fall protection. Abatement note: Abatement certification is required for this item (See Certification of Corrective Action Worksheet).
Recent events (1)
- — Z (S) $2217
1926.501 B04 II
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.501(b)(4)(ii): Each employee on a walking/working surface was not protected from tripping in or stepping into or through the holes, by covers: (a) On or about April 18, 2018, employees were exposed to falls through floor holes that were uncovered. The holes were on the first floor behind stairways, and were available to access piping. A cover was adjacent to one of the holes and was not in use. Abatement note: Abatement certification is required for this item (See Certification of Corrective Action Worksheet).
Recent events (1)
- — Z (S) $0
1926.1052 C01 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.1052(c)(1)(i): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with at least one handrail: (a) On or about April 18, 2018, employees were exposed to falls from the stairways that did not have handrails. The stairways were the only method to access the 2nd floor on which the employees were working. Abatement note: Abatement certification isrequired for this item (See Certification of Corrective Action Worksheet).
Recent events (1)
- — Z (S) $0
1926.503 A01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: (a) On or about April 18, 2018, employees were exposed to fall hazards from greater than 10 feet, down stairs, and through floor holes, without recognizing the hazards and taking steps to abate the hazards. The employees were not trained to recognize and prevent the hazards. Abatement note: Abatement certification is required for this item (See Certification of Corrective Action Worksheet).
Recent events (1)
- — Z (S) $0
More inspections at CANYON FRAMING, INC.
TEMECULA, CA—2001-06-22 00:00:00
CANYON FRAMING INC
View CANYON FRAMING, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238130)
FAIRHOPE, AL—2026-07-16
FRANCISCO ARES
WOODHAVEN, MI—2026-07-16
G.J. PERELLI CO., L.L.C.
PHILADELPHIA, PA—2026-07-16
URUS CONSTRUCTION CORPORATION
BERLIN, NJ—2026-07-16
URUS CONSTRUCTION CORPORATION
MERIDIAN, ID—2026-07-15
TRIPLE R CONSTRUCTION LLC
More inspections in CO
BROOMFIELD, CO—2026-07-16
WAVELYNX TECHNOLOGIES LLC
COLORADO SPRINGS, CO—2026-07-15
ELMER CONTRACTOR LLC
SHERIDAN, CO—2026-07-15
JOHN'S COLLISION REPAIR, INC.
CENTENNIAL, CO—2026-07-15
BRAKES PLUS, INC
ENGLEWOOD, CO—2026-07-15
PCL CIVIL CONSTRUCTORS INC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343097028.