Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RASTELLI BROTHERS INCORPORATED

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of RASTELLI BROTHERS INCORPORATED in 300 HERON DRIVE, SWEDESBORO, NJ 08085 (NAICS 333241). OSHA activity number 343106639.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rastelli Brothers Incorporated — free Get an email when a new federal OSHA severe-injury report for Rastelli Brothers Incorporated is published. One employer, no account, unsubscribe in one click.
Site address
300 HERON DRIVE
City
SWEDESBORO
State
NJ
ZIP
08085
Mailing
300 HERON DRIVE, SWEDESBORO, NJ 08085
Inspection type
Referral (C)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333241
Employees
340
Ownership type
A

4 citations on file for this inspection.

1910.37 A03

Serious Gravity 1 4 instances 100 exposed
Issued
Aug 30, 2018
Abate by
Sep 6, 2018
Penalty
Initial $6,097 · Current $3,000 Reduced
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed:    a) Receiving dock in front of manager's office: The exit door leading from the inside of the meat cooler was blocked on the outside by pallet of cardboard, on or about 4/23/18.     b) North corner of shipping dock: The exit route leading from the warehouse to an exit door was blocked by a pallet of cardboard and a cart reducing the opening to 17 inches, on or about 4/23/18.     c) Meat Processing Area trim line: The exit route from the trim line was blocked by a moveable cart and a pallet of meat, on or about 5/15/18.    d) Organic Grind Room east side packaging line: The exit route from the packaging line between the conveyor and pack line was blocked by a cart used to stack molded pieces of meat, on or about 5/15/18.        NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $6097

1910.1200 E01

Serious Gravity 5 1 instance 100 exposed
Issued
Aug 30, 2018
Abate by
Sep 26, 2018
Penalty
Initial $10,163 · Current $5,000 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which described how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) would be met:    a) Throughout facility: The employer did not develop and implement a written hazard communication program for the chemicals used by employees, such as, but not limited to, argon, ozone, ALPET E3 Plus and isopropyl alcohol, and corrosive chemicals GO2 Acidified Sodium Chlorite and C-1000 sanitizer, on or about 4/23/18.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $5000
  • — Z (S) $10163

1910.1200 H01

Serious Gravity 5 1 instance 100 exposed
Issued
Aug 30, 2018
Abate by
Sep 26, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  a) Throughout facility: Employees were not provided effective hazard communication training for the chemicals specifically used in the facility, such as, but not limited to, argon, ozone, ALPET E3 Plus and isopropyl alcohol, and corrosive chemicals GO2 Acidified Sodium Chlorite and C-1000 sanitizer, on or about 4/23/18.  NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.212 A01

Willful Gravity 10 2 instances 12 exposed
Issued
Aug 30, 2018
Abate by
Sep 26, 2018
Penalty
Initial $129,336 · Current $71,000 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    a) Meat Production; Band saw Area: The unused portion of the five (5) Biro band saw blades were not guarded when cutting various sizes of meat, on or about 4/23/18.    b) Meat Production; Band saw Area: End cut pusher plates were not used when cutting the last cuts of meat products or thin meat products on the five (5) Biro band saws, on or about 4/23/18.    NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (W) $71000
  • — Z (W) $129336

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343106639.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.