STANLEY, NY —
OSHA Inspection: FIELD TRIPS 101, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of FIELD TRIPS 101, INC. in 2257 COUNTY ROUTE 4, STANLEY, NY 14560 (NAICS 485510). OSHA activity number 343114898.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FIELD TRIPS 101, INC.
- Site address
- 2257 COUNTY ROUTE 4
- City
- STANLEY
- State
- NY
- ZIP
- 14560
- Mailing
- P. O. BOX 221, GENEVA, NY 14456
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 485510
- Employees
- 7
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.28 B01 I
- Issued
- Jun 15, 2018
- Abate by
- Jul 10, 2018
- Penalty
- Initial $6,467 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that was 4 feet (1.2 m) or more above a lower level was protected from falling by one or more of the following: Guardrail systems, safety net systems, or personal fall arrest systems: a) Shop, on or about 4/9/18: The employer did not ensure that each employee working on top of a motor coach bus was protected from falling 12 feet 4 inches to the floor.
Recent events (3)
- — F (S) $1500
- — C (S) $6467
- — Z (S) $6467
1910.176 B
- Issued
- Jun 15, 2018
- Abate by
- Jul 10, 2018
- Penalty
- Initial $3,880 · Current $500 Reduced
General-duty citation text
29 CFR 1910.176(b): Storage of material created a hazard: a) Shop, on or about 4/26/18: Shelving units containing miscellaneous repair and replacement parts were overloaded and unsecured and the materials on the shelves were piled in an unstable manner.
Recent events (3)
- — F (O) $500
- — C (S) $3880
- — Z (S) $3880
1910.212 A01
- Issued
- Jun 15, 2018
- Abate by
- Jul 5, 2018
- Penalty
- Initial $5,174 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Shop, on or about 4/26/18: Genesis 10 Inch drill press was not equipped with a guard to protect the operator from contact with the rotating chuck and serrated tool.
Recent events (3)
- — F (S) $2000
- — C (S) $5174
- — Z (S) $5174
1910.215 A04
- Issued
- Jun 15, 2018
- Abate by
- Jun 25, 2018
- Penalty
- Initial $5,174 · Current $0 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work: a) Shop, on or about 4/26/18: DeWalt pedestal grinder, DW756, was not equipped with a work rest to support offhand grinding work.
Recent events (3)
- — F (S) $0
- — C (S) $5174
- — Z (S) $5174
1910.215 B09
- Issued
- Jun 15, 2018
- Abate by
- Jun 25, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) Shop, on or about 4/26/18: DeWalt pedestal grinder, DW756, had the adjustable tongue guard positioned 7/8-inches from the abrasive wheel.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.252 B02 III
- Issued
- Jun 15, 2018
- Abate by
- Jun 25, 2018
- Penalty
- Initial $5,174 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields: a) Shop, on or about 4/26/18: Employees working adjacent to welding operations were not protected from the welding rays by the use of noncombustible or flameproof screens or shields.
Recent events (3)
- — F (S) $1000
- — C (S) $5174
- — Z (S) $5174
1910.178 L01 I
- Issued
- Jun 15, 2018
- Abate by
- Jul 20, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) Field Trips 101, Inc., on or about 4/26/18: The employer did not ensure that each powered industrial truck operator received training and evaluation prior to driving the Nissan forklift.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 485510)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343114898.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.