LUBBOCK, TX —
OSHA Inspection: MIGUEL CHAIREZ
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MIGUEL CHAIREZ in 13818 UVALDE AVE., LUBBOCK, TX 79423 (NAICS 238130). OSHA activity number 343118378.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MIGUEL CHAIREZ
- Site address
- 13818 UVALDE AVE.
- City
- LUBBOCK
- State
- TX
- ZIP
- 79423
- Mailing
- 300 E KENTUCKY ST., FLOYDADA, TX 79235
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 8
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.100 A
- Issued
- May 23, 2018
- Abate by
- Jun 19, 2018
- Penalty
- Initial $1,663 · Current $800 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: On or about April 27, 2018, employees working without hard hats were exposed to struck-by hazards while working on the ground level as other employees performed framing work above.
Recent events (2)
- — I (S) $800
- — Z (S) $1663
1926.102 A01
- Issued
- May 23, 2018
- Abate by
- Jun 19, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical agents. On or about April 27, 2018, employees engaged in framing activities were exposed to struck-by hazards while operating pneumatic nail guns without eye protection.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.416 E01
- Issued
- May 23, 2018
- Abate by
- Jun 19, 2018
- Penalty
- Initial $1,663 · Current $800 Reduced
General-duty citation text
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used. On or about March 27, 2018, an employee performing framing activities was exposed to electrical shock hazards while operating a Makita circular saw with the extension cord frayed or damaged.
Recent events (2)
- — I (S) $800
- — Z (S) $1663
1926.501 B13
- Issued
- May 23, 2018
- Abate by
- Jun 19, 2018
- Penalty
- Initial $3,880 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b). On or about April 27, 2018, employees engaged in framing work without fall protection were exposed to fall hazards in excess of six feet.
Recent events (2)
- — I (S) $2000
- — Z (S) $3880
1926.503 A01
- Issued
- May 23, 2018
- Abate by
- Jun 19, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: On or about April 27, 2018, employees performing framing work without fall protection were not provided a program to enable them to recognize fall hazards and the procedures to follow in order to minimize those hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Miguel Chairez
View Miguel Chairez's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343118378.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.