CHICAGO, IL —
OSHA Inspection: JERNBERG INDUSTRIES, LLC DBA AAM METAL FORMING
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of JERNBERG INDUSTRIES, LLC DBA AAM METAL FORMING in 3908 S. PRINCETON AVENUE, CHICAGO, IL 60609 (NAICS 336390). OSHA activity number 343122958.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JERNBERG INDUSTRIES, LLC DBA AAM METAL FORMING
- Site address
- 3908 S. PRINCETON AVENUE
- City
- CHICAGO
- State
- IL
- ZIP
- 60609
- Mailing
- 328 W. 40TH STREET, CHICAGO, IL 60609
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336390
- Employees
- 325
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C07 I
- Issued
- Sep 12, 2018
- Abate by
- Nov 9, 2018
- Penalty
- Initial $9,239 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices: a) On or about April 21, 2018, the employer failed to provide adequate training for employees performing service and/or maintenance activities to ensure the knowledge and skills required for the safe application, usage and removal of energy control devices were acquired. A maintenance employee sustained an amputation to the middle finger on the left hand during servicing of the Sumitomo/CIMF Press #2, Model No. TFPX300, Serial No. SSMA0600, while it was still operating, not de-energized and locked out.
Recent events (2)
- — I (S) $0
- — Z (S) $9239
1910.147 D
- Issued
- Sep 12, 2018
- Abate by
- Nov 9, 2018
- Penalty
- Initial $12,934 · Current $10,348 Reduced
General-duty citation text
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): a) Chicago Manufacturing Facility 2, Line 2 - On or about April 21, 2018, an employee was exposed to machine hazards associated with moving parts and pinch-points during troubleshooting maintenance activities on the Sumitomo/CIMF Press #2, Model No. TFPX300, Serial No. SSMA0600, which resulted in the amputation to the tip of the left hand middle finger. The employer failed to implement energy control application steps as the machine was not shut down or turn off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)((i)], and verification of isolation [(d)(6)], were not implemented to protect employees from machine servicing hazards.
Recent events (2)
- — I (S) $10348
- — Z (S) $12934
1910.147 C06 I
- Issued
- Sep 12, 2018
- Abate by
- Nov 9, 2018
- Penalty
- Initial $1,037 · Current $830 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) On or about April 21, 2018, authorized employees were required to perform servicing and/or maintenance to the Sumitomo/CIMF Press #2, Model No. TFPX300, Serial No. SSMA0600. The employer did not ensure periodic inspections of the energy control procedures were performed at least annually as required by the standard.
Recent events (2)
- — I (O) $830
- — Z (O) $1037
More inspections at Jernberg Industries, LLC DBA AAM Metal Forming
View Jernberg Industries, LLC DBA AAM Metal Forming's full OSHA safety record →
More inspections in this industry (NAICS 336390)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343122958.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.