HUMBLE, TX —
OSHA Inspection: JOHN BEAN TECHNOLOGIES CORPORATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of JOHN BEAN TECHNOLOGIES CORPORATION in 19175 LEE ROAD SUITE 450, HUMBLE, TX 77338 (NAICS 488190). OSHA activity number 343131876.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JOHN BEAN TECHNOLOGIES CORPORATION
- Site address
- 19175 LEE ROAD SUITE 450
- City
- HUMBLE
- State
- TX
- ZIP
- 77338
- Mailing
- 19175 LEE ROAD SUITE 450, HUMBLE, TX 77338
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 488190
- Employees
- 245
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 II B
- Issued
- Jun 6, 2018
- Abate by
- Jun 25, 2018
- Penalty
- Initial $12,934 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy. On or about May 1, 2018, and times prior thereto, in Terminal Mechanical Rooms, where employees were exposed to struck-by hazards when performing repair on air handler units without energy control procedures that did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy.
Recent events (3)
- — R (S) $0
- — C (S) $12934
- — Z (S) $12934
1904.7 B03
- Issued
- Jun 6, 2018
- Abate by
- Jun 25, 2018
- Penalty
- Initial $2,033 · Current $1,017 Reduced
General-duty citation text
29 CFR 1904.7(b)(3): The employer did not correctly classify the following work-related injuries or illnesses on the OSHA Form 300 or equivalent. On May 1, 2018, the employer provided a 2018 OSHA Form 300 that did not correctly classify a work place injury.
Recent events (3)
- — R (O) $1016.5
- — C (O) $2033
- — Z (O) $2033
1904.29 B02
- Issued
- Jun 6, 2018
- Abate by
- Jun 25, 2018
- Penalty
- Initial $2,033 · Current $0 Reduced
General-duty citation text
29 CFR 1904.29(b)(2): The employer did not fill out or correctly fill out an OSHA Form 301 or equivalent for each recordable injury or illness. On May 1, 2018: a. The Employer provided a copy of the OSHA Form 301 for a work related injury, Case No. E7L9885, which was not correctly filled out. b. The Employer provided a copy of the OSHA Form 301 for a work related injury, Case No. E7L9678, which was not correctly filled out.
Recent events (3)
- — R (O) $0
- — C (O) $2033
- — Z (O) $2033
1904.32 A03
- Issued
- Jun 6, 2018
- Abate by
- Jun 25, 2018
- Penalty
- Initial $2,033 · Current $0 Reduced
General-duty citation text
29 CFR 1904.32(a)(3): The employer did not certify an OSHA 300A Form or equivalent. On May 1, 2018, the Employer provided a copy of the OSHA Form 300A for 2017 that was not certified.
Recent events (3)
- — R (O) $0
- — C (O) $2033
- — Z (O) $2033
1910.303 B07 IV
- Issued
- Jun 6, 2018
- Abate by
- Jun 25, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(7)(iv): Equipment with damaged parts that may adversely affect its safe operation or its mechanical strength, such as broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating parts shall not be used: On or about May 1, 2018, and times prior thereto, in Mechanical Room CS1132M, where employees performed service and maintenance around an electrical motor relay box cover that was held in place with wire ties.
Recent events (3)
- — R (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at John Bean Technologies Corporation
View John Bean Technologies Corporation's full OSHA safety record →
More inspections in this industry (NAICS 488190)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343131876.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.