MINOT, ND —
OSHA Inspection: DAKOTA TRUCK & FARM, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DAKOTA TRUCK & FARM, INC. in 1604 20TH AVENUE SE, MINOT, ND 58701 (NAICS 811111). OSHA activity number 343136107.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DAKOTA TRUCK & FARM, INC.
- Site address
- 1604 20TH AVENUE SE
- City
- MINOT
- State
- ND
- ZIP
- 58701
- Mailing
- 1604 20TH AVENUE SE, MINOT, ND 58701
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811111
- Employees
- 42
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.179 B05
- Issued
- Jul 30, 2018
- Abate by
- Aug 23, 2018
- Penalty
- Initial $6,467 · Current $3,234 Reduced
General-duty citation text
29 CFR 1910.179(b)(5): The rated load of crane(s) was not plainly marked on each side of the crane: (a) On or about April 20 and at times prior, for the employees exposed to crushing hazards lifting engine and drive train parts where the bay 6 manual gantry crane did not have a determined load rating visibly marked at 1604 20th Avenue SE, Minot ND. (b) On or about April 20 and at times prior, for the employees exposed to crushing hazards lifting engine and drive train parts where the bay 7 manual gantry crane did not have a determined load rating visibly marked at 1604 20th Avenue SE, Minot ND. (c) On or about April 20 and at times prior, for the employees exposed to crushing hazards lifting engine and drive train parts where the bay 8 manual gantry crane did not have a determined load rating visibly marked at 1604 20th Avenue SE, Minot ND.
Recent events (2)
- — I (S) $3233.5
- — Z (S) $6467
1910.179 J03
- Issued
- Jul 30, 2018
- Abate by
- Aug 23, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(3): Complete inspections of the crane was not being performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section: (a) On or about April 20 and at times prior, for the employees exposed to crushing hazards lifting engine and drive train parts where the bay 6 manual gantry crane did not have periodic inspections to determine serviceability at 1604 20th Avenue SE, Minot ND. (b) On or about April 20 and at times prior, for the employees exposed to crushing hazards lifting engine and drive train parts where the bay 7 manual gantry crane did not have periodic inspections to determine serviceability at 1604 20th Avenue SE, Minot ND. (c) On or about April 20 and at times prior, for the employees exposed to crushing hazards lifting engine and drive train parts where the bay 8 manual gantry crane did not have periodic inspections to determine serviceability at 1604 20th Avenue SE, Minot ND.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Jul 30, 2018
- Abate by
- Aug 23, 2018
- Penalty
- Initial $6,467 · Current $3,234 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about April 20 and at times prior for the employees exposed to struck by hazards while pressing bearings and other parts where the front of the General Trading 10,000 PSI piston press was not guarded at 1604 20th Avenue SE Minot, ND.
Recent events (2)
- — I (S) $3233.5
- — Z (S) $6467
1910.215 A04
- Issued
- Jul 30, 2018
- Abate by
- Aug 23, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: (a) On or about April 20 and at times prior for the employees exposed to spalding hazards where the Tool Shop grinder work rest was ¾ inch from the grinding wheel at 1604 20th Avenue SE Minot, ND.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- Jul 30, 2018
- Abate by
- Aug 23, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) On or about April 20 and at times prior for the employees exposed to spalding hazards where the Tool Shop and DeWalt grinders tongue guards had an opening of one inch from the grinding wheels at 1604 20th Avenue SE Minot, ND.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 811111)
More inspections in ND
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343136107.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.