Safety Incidents OSHA Severe Injury Reports · 2015–2025
4,113,118Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: BROADVIEW CONSTRUCTION, LLC

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of BROADVIEW CONSTRUCTION, LLC in 416 N. SECOND STREET, BAINBRIDGE, PA 17502 (NAICS 238170). OSHA activity number 343142501.

Watch Broadview Construction, LLC — free Get an email when a new federal OSHA severe-injury report for Broadview Construction, LLC is published. One employer, no account, unsubscribe in one click.
Site address
416 N. SECOND STREET
City
BAINBRIDGE
State
PA
ZIP
17502
Mailing
2008A MARIETTA AVENUE, LANCASTER, PA 17603
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238170
Employees
2
Ownership type
A

3 citations on file for this inspection.

1926.453 B02 V

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2217.00 · Current $1550.00 Reduced
29 CFR 1926.453(b)(2)(v): A lanyard was not attached to the boom or basket when working from an aerial lift:    a)  416 N. Second Street, Bainbridge PA - An employee was observed working from a JLG aerial lift and did not have the lanyard of a personal fall arrest system attached to the boom or basket, exposed to an approximate 15 foot fall hazard to the ground below, on or about May 7, 2018.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $1550
  • — Z (S) $2217

1926.501 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Abate by
Penalty
Initial $2217.00 · Current $1550.00 Reduced
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:    a)  416 N. Second Street, Bainbridge PA -  An employee was observed installing siding while working from a flat roof and was not protected from an 11 foot - 4 inch fall hazard to the ground below, on or about May 7, 2018.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $1550
  • — Z (S) $2217

1926.1053 B05 I

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2217.00 · Current $1550.00 Reduced
29 CFR 1926.1053(b)(5)(i): Non-self-supporting ladder(s) were not used at an angle such that the horizontal distance from the top support to the foot of the ladder was approximately one-quarter of the working length of the ladder:    a)  416 N. Second Street, Bainbridge PA - Employees were observed using a portable Louisville fiberglass extension ladder to access the roof and the ladder was set up at an unsafe angle, on or about May 7, 2018.  The horizontal distance from the top support to the foot of the ladder exceeded one-fourth of the working length.  The foot of the ladder measured 87 inches from the top support and should have measured no more than 34 inches.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $1550
  • — Z (S) $2217

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343142501.