Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CELTIC STONE GRANITE AND TILE LLC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of CELTIC STONE GRANITE AND TILE LLC in 1059 N FENWICK ST, ALLENTOWN, PA 18109 (NAICS 327991). OSHA activity number 343149472.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Celtic Stone Granite and Tile LLC — free Get an email when a new federal OSHA severe-injury report for Celtic Stone Granite and Tile LLC is published. One employer, no account, unsubscribe in one click.
Site address
1059 N FENWICK ST
City
ALLENTOWN
State
PA
ZIP
18109
Mailing
1059 N FENWICK ST, ALLENTOWN, PA 18109
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
327991
Employees
5
Ownership type
A

5 citations on file for this inspection.

1910.147 C01

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 4, 2018
Abate by
Jul 31, 2018
Penalty
Initial $2,217 · Current $1,330 Reduced
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:    a)  Worksite - On or about 5/10/18, the employer did not develop a written lockout tagout program with employee training and periodic inspections.
Recent events (2)
  • — I (S) $1330.2
  • — Z (S) $2217

1910.242 A

Serious Gravity 5 1 instance 4 exposed
Issued
Jun 4, 2018
Penalty
Initial $1,885 · Current $1,131 Reduced
29 CFR 1910.242(a): Hand and portable powered tools or equipment were not kept in safe condition:    a)  Worksite - On or about 5/10/18, employees are using a modified Makita grinder that was not kept in safe condition.
Recent events (2)
  • — I (S) $1131
  • — Z (S) $1885

1910.334 A02 I

Serious Gravity 5 1 instance 4 exposed
Issued
Jun 4, 2018
Penalty
Initial $2,772 · Current $1,663 Reduced
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket):    a)  Worksite - On or about 5/10/18, extension cords were not inspected for damage before use.
Recent events (2)
  • — I (S) $1663.2
  • — Z (S) $2772

1910.334 A02 II

Serious Gravity 5 1 instance 4 exposed
Issued
Jun 4, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposes an employee to injury and the defective or damaged item was not removed from service and an employee was using it before repairs and tests necessary to render the equipment safe were made:  a)  Worksite - On or about 5/10/18, extension cords used in wet location had damage and were not taken out of service.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 L06

Other-than-serious 1 instance 1 exposed
Issued
Jun 4, 2018
Abate by
Jul 31, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):    a)  Worksite - On or about 5/10/18, the employer did not certify that the operator was trained and evaluated in safe forklift operation.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Celtic Stone Granite and Tile LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343149472.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.