Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LUNA BROTHERS CONSTRUCTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of LUNA BROTHERS CONSTRUCTION in 2319 E SHARON RD, CINCINNATI, OH 45241 (NAICS 238130). OSHA activity number 343153516.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Luna Brothers Construction — free Get an email when a new federal OSHA severe-injury report for Luna Brothers Construction is published. One employer, no account, unsubscribe in one click.
Site address
2319 E SHARON RD
City
CINCINNATI
State
OH
ZIP
45241
Mailing
166 BAILEY ST, HAMILTON, OH 45011
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
3
Ownership type
A

4 citations on file for this inspection.

1926.20 B02

Serious Gravity 10 1 instance 2 exposed
Issued
Sep 20, 2018
Abate by
Oct 17, 2018
Penalty
Initial $3,880 · Current $2,500 Reduced
29 CFR 1926.20(b)(2): Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers.    On May 7, 2018, there were no frequent and regular inspections being performed by a competent person in that employees were performing framing work at fall heights greater than 14 feet above the hard surface below without a fall protection system; one exposed employee (the Foreman) had tied a knot to attach one end of his rope to the front of his harness and tied another knot to attach to the tubular welded scaffold frame; another exposed employee had tied a rope hitch to attach the anchor end of his rope to a notched plywood sheet underneath the roof soffit; no ladder was provided for access and one employee was observed climbing down the frame of the tubular welded frame scaffold; at least one exposed employee did not receive scaffold training by a Competent Person; the tubular welded frame scaffold was not erected by a Competent Person; scaffold components manufactured by different manufacturers were intermixed and structural integrity was not maintained by the user (missing cross braces); the tubular welded frame scaffold working level platform was not fully planked; the tubular welded frame scaffold had several base plates being supported by concrete masonry units; and the tubular welded frame scaffold did not have guardrails at the working level platform.
Recent events (2)
  • — I (S) $2500
  • — Z (S) $3880

1926.451 F07

Deleted Serious Gravity 10 1 instance 2 exposed
Issued
Sep 20, 2018
Abate by
Oct 17, 2018
Penalty
Initial $3,880 · Current $0 Reduced
29 CFR 1926.451(f)(7): Scaffolds shall be erected, moved, dismantled, or altered only under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration. Such activities shall be performed only by experienced and trained employees selected for such work by the competent person.  On May 7, 2018, located on the east side of a commercial structure, employees were observed working from a tubular welded frame scaffold that had not been erected under the supervision and direction of a Competent Person. Potential fall heights were measured to be greater than 14 feet above the ground below.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3880

1926.451 G01

Deleted Serious Gravity 10 1 instance 2 exposed
Issued
Sep 20, 2018
Abate by
Oct 17, 2018
Penalty
Initial $3,880 · Current $0 Reduced
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet (3.1 m) above a lower level shall be protected from falling to that lower level. Paragraphs (g)(1)(i) through (vii) of this section establish the types of fall protection to be provided to the employees on each type of scaffold. Paragraph (g)(2) of this section addresses fall protection for scaffold erectors and dismantlers.  Note to paragraph (g)(1): The fall protection requirements for employees installing suspension scaffold support systems on floors, roofs, and other elevated surfaces are set forth in subpart M of this part.  On May 7, 2018, located on the east side of a commercial structure, employees were observed working from the upper level working platform of a tubular welded frame scaffold while not utilizing a fall protection system. Potential fall heights were measured to be greater than 14 feet above the ground below.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3880

1926.454 A

Deleted Serious Gravity 10 1 instance 2 exposed
Issued
Sep 20, 2018
Abate by
Oct 17, 2018
Penalty
Initial $3,880 · Current $0 Reduced
29 CFR 1926.454(a): The employer shall have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. The training shall include the following areas, as applicable:  On May 7, 2018, employees were observed working from a tubular welded frame scaffold that had not received training to recognize the hazards associated with the type of scaffold being used, and to understand the procedures to control or minimize those hazards. Potential fall heights were measured to be greater than 14 feet above the hard surface below while not utilizing a fall protection system.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3880

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343153516.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.