Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MISTY ROBOTICS

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of MISTY ROBOTICS in 2540 FRONTIER AVE. SUITE 101, BOULDER, CO 80301 (NAICS 334419). OSHA activity number 343168589.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Misty Robotics — free Get an email when a new federal OSHA severe-injury report for Misty Robotics is published. One employer, no account, unsubscribe in one click.
Establishment
MISTY ROBOTICS
Site address
2540 FRONTIER AVE. SUITE 101
City
BOULDER
State
CO
ZIP
80301
Mailing
2540 FRONTIER AVE. SUITE 101, BOULDER, CO 80301
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
334419
Employees
31
Ownership type
A

3 citations on file for this inspection.

1910.1200 E01

Other-than-serious 2 instances 31 exposed
Issued
Aug 20, 2018
Abate by
Sep 24, 2018
Penalty
Initial $3,880 · Current $3,000 Reduced
29 CFR 1910.1200(e)(1):  The employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):     (a) Misty Robotics at 2450 Frontier Ave, Suite 101 in Boulder, CO: On and preceding May 31, 2018, Misty Robotics did not develop and implement a written hazard communication program that pertains to employee use of chemicals such as, but not limited to solders, glues and Bestine (Heptane).  This condition potentially exposes employees to chemical irritations to eyes, respiratory, and skin and inhalation hazards.
Recent events (2)
  • — I (O) $3000
  • — Z (S) $3880

1910.1200 H01

Serious Gravity 1 2 instances 31 exposed
Issued
Aug 20, 2018
Abate by
Sep 24, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1):  Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  (a) Misty Robotics at 2450 Frontier Ave, Suite 101 in Boulder, CO: On and preceding May 31, 2018, Misty Robotics did not provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new physical or health hazard the employees have not previously been trained about is introduced into their work area.  The employees use of chemicals such as, but not limited to solders, glues and Bestine (Heptane).  This condition potentially exposes employees to chemical irritations to eyes, respiratory, and skin and inhalation hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.132 D01

Other-than-serious 2 instances 31 exposed
Issued
Aug 20, 2018
Abate by
Sep 24, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE):  (a) Misty Robotics at 2450 Frontier Ave, Suite 101 in Boulder, CO: On and preceding May 31, 2018, Misty Robotics did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE).  Employees conducted operations which included exposure to hazardous nonionizing radiation and flying particles.  Hazardous operations included, but are not limited to the following:  1.  Exposure to Class IV carbon dioxide laser's non-ionizing radiation;  2.  Exposure to flying particles when processing acrylic or plastic materials; and 3.  Exposure to solder and glues while assembling the robot prototypes.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343168589.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.