OAK PARK, IL —
OSHA Inspection: MASONRY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MASONRY, INC. in 1146 S. OAK PARK AVE., OAK PARK, IL 60304 (NAICS 238140). OSHA activity number 343173084.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MASONRY, INC.
- Site address
- 1146 S. OAK PARK AVE.
- City
- OAK PARK
- State
- IL
- ZIP
- 60304
- Mailing
- 2318 GREENWOOD RD., GLENVIEW, IL 60026
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 3
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.100 A
- Issued
- Aug 23, 2018
- Abate by
- Sep 5, 2018
- Penalty
- Initial $2,217 · Current $1,465 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: a) On May 16, 2018, employees engaged in hoisting operations exposed to struck-by hazards were not wearing hard hats. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $1465
- — Z (S) $2217
1926.451 B01
- Issued
- Aug 23, 2018
- Abate by
- Sep 5, 2018
- Penalty
- Initial $3,880 · Current $2,600 Reduced
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels was not fully planked or decked between front uprights and the guardrail supports: a) On May 16, 2018, employees working from frame scaffolding were exposed to fall hazards of up to approximately 23 feet where the scaffold platform was not fully decked. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $2600
- — Z (S) $3880
1926.451 G01
- Issued
- Aug 23, 2018
- Abate by
- Sep 5, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level: a) On May 16, 2018, employees working from frame scaffolding were exposed to fall hazards of approximately 23 feet. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.451 C01
- Issued
- Aug 23, 2018
- Abate by
- Sep 5, 2018
- Penalty
- Initial $2,772 · Current $1,835 Reduced
General-duty citation text
29 CFR 1926.451(c)(1): Supported scaffold(s) with a height to base width (including outrigger supports) ratio greater than four to one (4:1) was not restrained from tipping by guying, tying, bracing, or equivalent means: a) On May 16, 2018, employees were exposed to fall hazards of approximately 23 feet while working on a frame scaffold which was not restrained from tipping by any means. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $1835
- — Z (S) $2772
1926.501 B13
- Issued
- Aug 23, 2018
- Abate by
- Sep 5, 2018
- Penalty
- Initial $3,880 · Current $2,600 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) On May 16, 2018, employees performing masonry work were exposed to fall hazards of approximately 21 feet. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $2600
- — Z (S) $3880
More inspections at Masonry, INC.
View Masonry, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343173084.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.