HARDIN, MT —
OSHA Inspection: HARDIN CHEVROLET, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HARDIN CHEVROLET, INC. in 307 PARK RD, HARDIN, MT 59034 (NAICS 441110). OSHA activity number 343177580.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HARDIN CHEVROLET, INC.
- Site address
- 307 PARK RD
- City
- HARDIN
- State
- MT
- ZIP
- 59034
- Mailing
- 307 PARK RD, HARDIN, MT 59034
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 441110
- Employees
- 35
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.28 B03 II
- Issued
- Jun 5, 2018
- Abate by
- Jun 29, 2018
- Penalty
- Initial $3,297 · Current $1,649 Reduced
General-duty citation text
29 CFR 1910.28(b)(3)(ii): (ii) Each employee is protected from tripping into or stepping into or through any hole that is less than 4 feet (1.2 m) above a lower level by covers or guardrail systems: a) Alignment Stall: On May 23, 2018 and at times prior, employees were exposed to tripping hazards while working near an uncovered floor hole of approximately 96 1/2 inches in width, 230 inches in length, and 15 inches in depth.
Recent events (2)
- — I (S) $1649
- — Z (S) $3297
1910.212 A01
- Issued
- Jun 5, 2018
- Abate by
- Jun 29, 2018
- Penalty
- Initial $3,297 · Current $1,649 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Service Shop: On May 23, 2018 and at times prior, employee were exposed to struck- by hazards while using an Ammco 3860 brake lathe.
Recent events (2)
- — I (S) $1649
- — Z (S) $3297
1910.215 A04
- Issued
- Jun 5, 2018
- Abate by
- Jun 29, 2018
- Penalty
- Initial $3,297 · Current $1,649 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a) Service Shop: On May 23, 2018 and at times prior, employees were exposed to caught-in hazards while operating a DeWalt DW 758 Bench Grinder that was not adjusted or being used in an effective manner.
Recent events (2)
- — I (S) $1649
- — Z (S) $3297
1910.215 B09
- Issued
- Jun 5, 2018
- Abate by
- Jun 29, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) Service Shop: On May 23, 2018 and at times prior, employees were exposed to struck-by hazards when the tongue guard on the DeWalt DW 758 Bench Grinder was not adjusted or being used in an effective manner.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Hardin Chevrolet, INC.
View Hardin Chevrolet, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 441110)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343177580.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.