LEBANON, PA —
OSHA Inspection: MHP INDUSTRIES, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MHP INDUSTRIES, INC. in 2402 E. CUMBERLAND STREET, LEBANON, PA 17042 (NAICS 321920). OSHA activity number 343178000.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MHP INDUSTRIES, INC.
- Site address
- 2402 E. CUMBERLAND STREET
- City
- LEBANON
- State
- PA
- ZIP
- 17042
- Mailing
- 2402 E. CUMBERLAND STREET, LEBANON, PA 17042
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321920
- Employees
- 22
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.133 A03
- Issued
- Nov 7, 2018
- Abate by
- Dec 5, 2018
- Penalty
- Initial $3,696 · Current $3,696
General-duty citation text
29 CFR 1910.133(a)(3): The employer did not ensure that each affected employee who wore prescription lenses while engaged in operations that involved eye hazards wore eye protection that incorporated the prescription in its design, or wore eye protection that could be worn over the prescription lenses without disturbing the proper position of the prescription lenses or the protective lenses.. (a) Tear Down Department - On or about August 1, 2018, multiple employees in the Tear Down Department were observed wearing prescription eyeglasses while working with wood working equipment. The eyeglasses were not ANSI Z-87.1 approved. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (S) $3696
1910.212 A03 I
- Issued
- Nov 7, 2018
- Abate by
- Dec 5, 2018
- Penalty
- Initial $5,174 · Current $5,174
General-duty citation text
29 CFR 1910.212(a)(3)(i): The point of operation of machines whose operation exposes an employee to injury, was not guarded as required: (a) Tear Down Department - Employees used the Dismantler horizontal pallet dismantling band saw to disassemble pallets, and the blade of the saw was not guarded from contact, thereby exposing employees to serious injury and amputation hazards, on or about May 18, 2018. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (S) $5174
1910.303 B07 IV
- Issued
- Nov 7, 2018
- Abate by
- Dec 5, 2018
- Penalty
- Initial $3,696 · Current $3,696
General-duty citation text
29 CFR 1910.303(b)(7)(iv): Equipment with damaged parts that may adversely affect its safe operation or its mechanical strength, such as broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating parts shall not be used: (a) Tear Down Department - Employees using the Tear Down Saw 2 were exposed to electrical shock hazards from exposed live conductors on or about August 1, 2018. The electrical cover on the 230/460 volt Baldor motor was damaged and no longer attached. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (S) $3696
1910.305 B01 I
- Issued
- Nov 7, 2018
- Abate by
- Dec 5, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasion, and openings through which conductors entered were not effectively closed: (a) Tear Down Department - Employees using the Tear Down Saw 2 were exposed to electrical shock hazards on or about August 1, 2018. Conductors entering the electrical panel box for the saw were pulled out and exposed to damage. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
- — Z (S) $0
1904.4 A
- Issued
- Nov 7, 2018
- Penalty
- Initial $739 · Current $739
General-duty citation text
29 CFR 1904.4(a): The employer did not keep records of work related fatalities, injuries or illnesses as required in the general recording criteria on the OSHA form 300 and OSHA form 300A or equivalent: a) MHP Industries, Inc - The employer failed to keep OSHA injury and illness records for calendar year 2018. Corrected during inspection
Recent events (1)
- — Z (O) $739
More inspections at MHP Industries, INC.
View MHP Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321920)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343178000.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.